[PATCH v2 10/12] dt-bindings: media: fsd: Document CSIS DMA controller

[Inbaraj E]

Document bindings for the FSD CSIS DMA controller.

Signed-off-by: Inbaraj E <inbaraj.e at samsung.com>
---
 .../bindings/media/tesla,fsd-csis-media.yaml  | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/tesla,fsd-csis-media.yaml

diff --git a/Documentation/devicetree/bindings/media/tesla,fsd-csis-media.yaml b/Documentation/devicetree/bindings/media/tesla,fsd-csis-media.yaml
new file mode 100644
index 000000000000..ce6c2e58ed4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/tesla,fsd-csis-media.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/tesla,fsd-csis-media.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD SoC MIPI CSI-2 DMA (Bridge device) receiver
+
+maintainers:
+  - Inbaraj E <inbaraj.e at samsung.com>
+
+description: |-
+  The FSD MIPI CSI-2 (Camera Serial Interface 2) have internal DMA engine to
+  capture frames originating from the sensor.
+
+properties:
+  compatible:
+    const: tesla,fsd-csis-media
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: pll
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csi0: csi at 12641000 {
+        compatible = "tesla,fsd-csis-media";
+        reg = <0x12661000 0x44c>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock_csi CAM_CSI0_0_IPCLKPORT_I_ACLK>,
+                 <&clock_csi CAM_CSI0_0_IPCLKPORT_I_PCLK>,
+                 <&clock_csi CAM_CSI_PLL>;
+        clock-names = "aclk", "pclk", "pll";
+        iommus = <&smmu_isp 0x0 0x0>;
+
+        port {
+            csi_in_0: endpoint {
+                remote-endpoint = <&mipi_csis_0_out>;
+            };
+        };
+    };
+
+...
-- 
2.49.0