[PATCH v5 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible

[Pritam Manohar Sutar]

Hi Rob, 

> -----Original Message-----
> From: Rob Herring <robh at kernel.org>
> Sent: 07 August 2025 05:12 AM
> To: Pritam Manohar Sutar <pritam.sutar at samsung.com>
> Cc: vkoul at kernel.org; kishon at kernel.org; krzk+dt at kernel.org;
> conor+dt at kernel.org; alim.akhtar at samsung.com; andre.draszik at linaro.org;
> peter.griffin at linaro.org; kauschluss at disroot.org;
> ivo.ivanov.ivanov1 at gmail.com; igor.belwon at mentallysanemainliners.org;
> m.szyprowski at samsung.com; s.nawrocki at samsung.com; linux-
> phy at lists.infradead.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> samsung-soc at vger.kernel.org; rosa.pila at samsung.com;
> dev.tailor at samsung.com; faraz.ata at samsung.com;
> muhammed.ali at samsung.com; selvarasu.g at samsung.com
> Subject: Re: [PATCH v5 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add
> ExynosAutov920 HS phy compatible
> 
> On Tue, Aug 05, 2025 at 05:22:11PM +0530, Pritam Manohar Sutar wrote:
> > This SoC has USB2.0 phy and supports only UTMI+ interface. This phy
> > requires two clocks, named as "phy" and "ref". The required supplies
> > for this phy are vdd075_usb20(0.75v), vdd18_usb20(1.8v),
> vdd33_usb20(3.3v).
> >
> > Add a dedicated compatible string for USB HS phy found in this SoC.
> >
> > Signed-off-by: Pritam Manohar Sutar <pritam.sutar at samsung.com>
> > ---
> >  .../bindings/phy/samsung,usb3-drd-phy.yaml    | 19
> +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> > b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> > index e906403208c0..1932a2272ef9 100644
> > --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-
> phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-
> phy.yaml
> > @@ -34,6 +34,7 @@ properties:
> >        - samsung,exynos7870-usbdrd-phy
> >        - samsung,exynos850-usbdrd-phy
> >        - samsung,exynos990-usbdrd-phy
> > +      - samsung,exynosautov920-usbdrd-phy
> >
> >    clocks:
> >      minItems: 1
> > @@ -110,6 +111,12 @@ properties:
> >    vddh-usbdp-supply:
> >      description: VDDh power supply for the USB DP phy.
> >
> > +  dvdd075-usb20-supply:
> > +    description: 0.75V power supply for the USB 2.0 phy.
> > +
> > +  vdd18-usb20-supply:
> > +    description: 1.8V power supply for the USB 2.0 phy.
> > +
> >  required:
> >    - compatible
> >    - clocks
> > @@ -219,6 +226,7 @@ allOf:
> >                - samsung,exynos7870-usbdrd-phy
> >                - samsung,exynos850-usbdrd-phy
> >                - samsung,exynos990-usbdrd-phy
> > +              - samsung,exynosautov920-usbdrd-phy
> >      then:
> >        properties:
> >          clocks:
> > @@ -235,6 +243,17 @@ allOf:
> >
> >          reg-names:
> >            maxItems: 1
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - samsung,exynosautov920-usbdrd-phy
> > +    then:
> > +      required:
> > +        - dvdd075-usb20-supply
> > +        - vdd18-usb20-supply
> > +        - vdd33-usb20-supply
> 
> Presumably the existing devices don't have these new supplies, so:
> 
> else:
>   properties:
>     dvdd075-usb20-supply: false
>     vdd18-usb20-supply: false

Appreciated for the suggestion. Will add this change in next version (v6) of
the patch-set. 
Snippet will look as mentioned below.

+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-usbdrd-phy
+    then:
+      required:
+        - dvdd075-usb20-supply
+        - vdd18-usb20-supply
+        - vdd33-usb20-supply
+
+    else:
+      properties:
+        dvdd075-usb20-supply: false
+        vdd18-usb20-supply: false

Thank you.

Regards,
Pritam