[PATCH v2] arm64: dts: ti: k3-j722s-main: Add E5010 JPEG Encoder

[Brandon Brnich]

Hello,

On 8/5/2025 8:34 AM, Brandon Brnich wrote:
> Hi Krzysztof,
> 
> Thanks for the review.
> 
> On 8/5/2025 1:02 AM, Krzysztof Kozlowski wrote:
>> On 04/08/2025 20:01, Brandon Brnich wrote:
>>> This adds node for E5010 JPEG Encoder which is a stateful JPEG Encoder
>>> present in J722s SoC, supporting baseline encoding of semiplanar based
>>> YUV420 and YUV422 raw video formats to JPEG encoding, with resolutions
>>> supported from 64x64 to 8kx8k.
>>>
>>> Signed-off-by: Brandon Brnich <b-brnich at ti.com>
>>> ---
>>>
>>> Changes in v2:
>>>    - remove invalid clock-names attribute
>>>
>>>   arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 10 ++++++++++
>>>   1 file changed, 10 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/ 
>>> boot/dts/ti/k3-j722s-main.dtsi
>>> index 5cfa7bf36641..fb24c14614b4 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
>>> @@ -385,6 +385,16 @@ c7x_1: dsp at 7e200000 {
>>>           ti,sci-proc-ids = <0x31 0xff>;
>>>           status = "disabled";
>>>       };
>>> +
>>> +    e5010: e5010 at fd20000 {
>>
>> Node names should be generic. See also an explanation and list of
>> examples (not exhaustive) in DT specification:
>> https://devicetree-specification.readthedocs.io/en/latest/chapter2- 
>> devicetree-basics.html#generic-names-recommendation
> 
> I got this name from the already present node in the am62a device 
> tree[0]. Should I replace both of these with more generic name such as 
> jpegenc?

Please ignore above comment, I was thinking about the label and not the 
node name. I understand node name needs to be jpeg-encoder.

Should label also be more generic? I see a few examples where the label 
is jpegenc or something more generic than the specific part name. But I 
don't see any specific rules in the devicetree specs on labels.


> 
>>
>>
>>> +        compatible = "img,e5010-jpeg-enc";
>>
>> Wrong compatible. This is TI, not IMG.
> 
> Devarsh has pointed out the same, I will update compatible that matches 
> TI version in v3.
> 
> Best,
> Brandon
> 
> [0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ 
> tree/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi#n1149
> 
>>
>>
>> Best regards,
>> Krzysztof
>