[PATCH v3 2/9] clk: renesas: r9a08g045: Add clocks and resets support for PCIe

[Geert Uytterhoeven]

On Fri, 4 Jul 2025 at 18:14, Claudiu <claudiu.beznea at tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>
> Add clocks and resets for the PCIe IP available on the Renesas RZ/G3S SoC.
> The clkl1pm clock is required for PCIe link power management (PM) control
> and should be enabled based on the state of the CLKREQ# pin. Therefore,
> mark it as a no_pm clock to allow the PCIe driver to manage it during link
> PM transitions.
>
> Tested-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>

Thanks for your patch!

> --- a/drivers/clk/renesas/r9a08g045-cpg.c
> +++ b/drivers/clk/renesas/r9a08g045-cpg.c
> @@ -289,6 +289,10 @@ static const struct rzg2l_mod_clk r9a08g045_mod_clks[] = {
>                                         MSTOP(BUS_MCPU2, BIT(14))),
>         DEF_MOD("tsu_pclk",             R9A08G045_TSU_PCLK, R9A08G045_CLK_TSU, 0x5ac, 0,
>                                         MSTOP(BUS_MCPU2, BIT(15))),
> +       DEF_MOD("pci_aclk",             R9A08G045_PCI_ACLK, R9A08G045_CLK_M0, 0x608, 0,
> +                                       MSTOP(BUS_PERI_COM, BIT(10))),
> +       DEF_MOD("pci_clk1pm",           R9A08G045_PCI_CLKL1PM, R9A08G045_CLK_ZT, 0x608, 1,

pci_clkl1pm

Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
i.e. will queue in renesas-clk for v6.18, with the above fixed.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds