[PATCH net-next 2/4] dt-bindings: net: ti: k3-am654-cpsw-nuss: update phy-mode in example

[Roger Quadros]

Hi Matthias,

On 15/04/2025 13:18, Matthias Schiffer wrote:
> k3-am65-cpsw-nuss controllers have a fixed internal TX delay, so RXID
> mode is not actually possible and will result in a warning from the
> driver going forward.
> 
> Signed-off-by: Matthias Schiffer <matthias.schiffer at ew.tq-group.com>
> ---
>  .../devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml          | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> index b11894fbaec47..c8128b8ca74fb 100644
> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> @@ -282,7 +282,7 @@ examples:
>                      ti,syscon-efuse = <&mcu_conf 0x200>;
>                      phys = <&phy_gmii_sel 1>;
>  
> -                    phy-mode = "rgmii-rxid";
> +                    phy-mode = "rgmii-id";
>                      phy-handle = <&phy0>;
>                  };
>              };

FYI the following TI boards using this driver are using "rgmii-rxid".
Will you be sending fixes to the device trees files?

arch/arm64/boot/dts/ti
k3-am625-beagleplay.dts:	phy-mode = "rgmii-rxid";
k3-am625-sk.dts:	phy-mode = "rgmii-rxid";
k3-am625-sk.dts.orig:	phy-mode = "rgmii-rxid";
k3-am62a7-sk.dts:	phy-mode = "rgmii-rxid";
k3-am62a-phycore-som.dtsi:	phy-mode = "rgmii-rxid";
k3-am62p5-sk.dts:	phy-mode = "rgmii-rxid";
k3-am62p5-sk.dts:	phy-mode = "rgmii-rxid";
k3-am62-phycore-som.dtsi:	phy-mode = "rgmii-rxid";
k3-am62-verdin-dev.dtsi:	phy-mode = "rgmii-rxid";
k3-am62-verdin.dtsi:	phy-mode = "rgmii-rxid";
k3-am62-verdin-ivy.dtsi:	phy-mode = "rgmii-rxid";
k3-am62x-phyboard-lyra.dtsi:	phy-mode = "rgmii-rxid";
k3-am62x-sk-common.dtsi:	phy-mode = "rgmii-rxid";
k3-am642-evm.dts:	phy-mode = "rgmii-rxid";
k3-am642-evm.dts:	phy-mode = "rgmii-rxid";
k3-am642-sk.dts:	phy-mode = "rgmii-rxid";
k3-am642-sk.dts:	phy-mode = "rgmii-rxid";
k3-am642-tqma64xxl-mbax4xxl.dts:	phy-mode = "rgmii-rxid";
k3-am642-tqma64xxl-mbax4xxl.dts:	/* phy-mode is fixed up to rgmii-rxid by prueth driver to account for
k3-am64-phycore-som.dtsi:	phy-mode = "rgmii-rxid";
k3-am654-base-board.dts:	phy-mode = "rgmii-rxid";
k3-am67a-beagley-ai.dts:	phy-mode = "rgmii-rxid";
k3-am68-sk-base-board.dts:	phy-mode = "rgmii-rxid";
k3-am69-sk.dts:	phy-mode = "rgmii-rxid";
k3-j7200-common-proc-board.dts:	phy-mode = "rgmii-rxid";
k3-j721e-beagleboneai64.dts:	phy-mode = "rgmii-rxid";
k3-j721e-common-proc-board.dts:	phy-mode = "rgmii-rxid";
k3-j721e-evm-gesi-exp-board.dtso:	phy-mode = "rgmii-rxid";
k3-j721e-evm-gesi-exp-board.dtso:	phy-mode = "rgmii-rxid";
k3-j721e-evm-gesi-exp-board.dtso:	phy-mode = "rgmii-rxid";
k3-j721e-evm-gesi-exp-board.dtso:	phy-mode = "rgmii-rxid";
k3-j721e-sk.dts:	phy-mode = "rgmii-rxid";
k3-j721s2-common-proc-board.dts:	phy-mode = "rgmii-rxid";
k3-j721s2-evm-gesi-exp-board.dtso:	phy-mode = "rgmii-rxid";
k3-j722s-evm.dts:	phy-mode = "rgmii-rxid";
k3-j784s4-j742s2-evm-common.dtsi:	phy-mode = "rgmii-rxid";
k3-j784s4-j742s2-evm-common.dtsi:	phy-mode = "rgmii-rxid";

-- 
cheers,
-roger