[PATCH] media: dt-bindings: sony,imx290: Update usage example

[Laurent Pinchart]

On Wed, Apr 30, 2025 at 03:03:10PM +0200, Geert Uytterhoeven wrote:
> On Wed, 30 Apr 2025 at 14:58, Niklas Söderlund wrote:
> > Since commit 98e0500eadb7 ("media: i2c: imx290: Add configurable link
> > frequency and pixel rate") the driver expects two specific
> > link-frequency settings 2-lane (445500000, 297000000) and 4-lane
> > (222750000, 148500000) operation. The driver fails to probe without
> > these exact settings.
> >
> > Update the example in the bindings to match this to make it easier for
> > users to incorporate this sensor in their device tree descriptions
> > without having to read the driver sources when the driver fails to
> > probe.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
> 
> Thanks for your patch!
> 
> > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
> > @@ -136,7 +136,7 @@ examples:
> >              port {
> >                  imx290_ep: endpoint {
> >                      data-lanes = <1 2 3 4>;
> > -                    link-frequencies = /bits/ 64 <445500000>;
> > +                    link-frequencies = /bits/ 64 <222750000 148500000>;
> >                      remote-endpoint = <&csiphy0_ep>;
> >                  };
> >              };
> 
> I guess the link-frequencies property should gain a rule that it
> needs two values, too?

The driver doesn't require two frequencies (unless I'm mistaken), it
could operate with a single one (albeit not in all resolutions), so I
don't think we should require two frequencies in the bindings.

-- 
Regards,

Laurent Pinchart