[PATCH 1/2] phy: exynos5-usbdrd: fix setting LINKSYSTEM_FLADJ on exynos7870

[André Draszik]

The code here is trying to set the FLADJ field to 0x20, so it should
clear any previous value in that field before or'ing-in the new value.

Fixes: 588d5d20ca8d ("phy: exynos5-usbdrd: add exynos7870 USBDRD support")
Signed-off-by: André Draszik <andre.draszik at linaro.org>
---
 drivers/phy/samsung/phy-exynos5-usbdrd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 634c4310c660a50e5d0869645506ab1b64fffd4b..4ea1fabd4d6f9c9fe412f17d4d26be07724b6361 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -1186,6 +1186,7 @@ static void exynos7870_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 	 * See xHCI 1.0 spec, 5.2.4
 	 */
 	reg |= LINKSYSTEM_XHCI_VERSION_CONTROL;
+	reg &= ~LINKSYSTEM_FLADJ;
 	reg |= FIELD_PREP_CONST(LINKSYSTEM_FLADJ, 0x20);
 	/* Set VBUSVALID signal as the VBUS pad is not used */
 	reg |= LINKSYSTEM_FORCE_BVALID;

-- 
2.49.0.901.g37484f566f-goog