[PATCH v2 4/4] [NOT FOR UPSTREAM] firmware: arm_scmi: quirk: Ignore FC bit in attributes

[Johan Hovold]

On Fri, Apr 25, 2025 at 01:52:50PM +0100, Cristian Marussi wrote:
> Some platform misreported the support of FastChannel when queried: ignore
> that bit on selected platforms.
> 
> Signed-off-by: Cristian Marussi <cristian.marussi at arm.com>
> ---
> Match features has to be set-up properly before upstreaming this.
> Ideally the out-of-spec firmware should be matched with a quirk matching
> pattern based on Vendor/SubVendor/ImplVersion....but it is NOT clear if the
> platform at hand will ship with future fixed firmwares where the ImplVersion
> field is properly handled.
> If we cannot be sure about that, we should fallback to a compatible match.
> 
> v1 -> v2
> - use multiple compats quirks syntax
> 
> RFC->V1
> - fix QUIRKS conditions

>  /* Global Quirks Definitions */
>  DEFINE_SCMI_QUIRK(clock_rates_triplet_out_of_spec, NULL, NULL, NULL);
> +DEFINE_SCMI_QUIRK(perf_level_get_fc_force,
> +		  "bad-vend", NULL, "0x20000-", "bad-compat", "bad-compat-2");

Still works when matching on vendor and version (and/or machine or SoC
compatible):

Reviewed-by: Johan Hovold <johan+linaro at kernel.org>
Tested-by: Johan Hovold <johan+linaro at kernel.org>

I think we can go ahead and merge this based on vendor and version
"0x20000-".

Depending on what Sibi finds out, or if it turns out to be needed, we
can always add an upper version bound later.

Johan