[PATCH v1 02/10] ARM: dts: exynos: Add rtc clock definitions for MAX77686 PMIC for Exynos4412 Odroid

[Krzysztof Kozlowski]

On 25/04/2025 15:26, Anand Moon wrote:
> The MAX77686A includes a crystal driver with an external load capacitance.
> When enabled, the crystal driver starts in low power mode. The
> LowJitterMode bit controls the crystal driver, allowing it to switch
> between low power mode and low jitter mode (high power mode).
> Setting the LowJitterMode bit to 1 activates low jitter mode on
> three channels simultaneously. These three 32khz buffer outputs
> (32KHAP, 32KHCP, P32KH) are independently enabled/disabled over I2C.
> 
> The 32khz_ap output is typically routed to the AP Processor, while the
> 32khz_cp and 32khz_pmic outputs are intended for BT, WLAN, BB,
> or peripheral chipsets.
> 
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
>  arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
> index 93ddbd4b0a18..03943c666d11 100644
> --- a/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
> @@ -289,6 +289,13 @@ max77686: pmic at 9 {
>  		reg = <0x09>;
>  		#clock-cells = <1>;
>  
> +		max77686_osc: clocks {
> +			compatible = "max77686-rtc";

I don't believe this works.

Best regards,
Krzysztof