[PATCH 0/3] ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)

[Rob Herring (Arm)]

On Fri, 18 Apr 2025 16:33:04 +0200, Stefan Wahren wrote:
> This series adds support for the Raspberry Pi 2 (2nd rev).
> 
> Stefan Wahren (3):
>   dt-bindings: arm: bcm2835: Add Raspberry Pi 2 (2nd rev)
>   ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)
>   arm64: dts: bcm: Add reference to RPi 2 (2nd rev)
> 
>  .../devicetree/bindings/arm/bcm/bcm2835.yaml  |   1 +
>  arch/arm/boot/dts/broadcom/Makefile           |   2 +
>  .../arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts | 130 ++++++++++++++++++
>  arch/arm64/boot/dts/broadcom/Makefile         |   1 +
>  .../boot/dts/broadcom/bcm2837-rpi-2-b.dts     |   2 +
>  5 files changed, 136 insertions(+)
>  create mode 100644 arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
>  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
> 
> --
> 2.34.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/next-20250417 (exact match)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/broadcom/' for 20250418143307.59235-1-wahrenst at gmx.net:

arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dtb: usb at 2a000 (generic-ehci): Unevaluated properties are not allowed ('dma-coherent' was unexpected)
	from schema $id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: soc (simple-bus): gpu: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: soc (simple-bus): firmware: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: soc (simple-bus): power: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: /soc/cprman at 7e101000: failed to match any schema with compatible: ['brcm,bcm2835-cprman']
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: /soc/gpio at 7e200000: failed to match any schema with compatible: ['brcm,bcm2835-gpio']
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: /soc/i2s at 7e203000: failed to match any schema with compatible: ['brcm,bcm2835-i2s']
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: /soc/aux at 7e215000: failed to match any schema with compatible: ['brcm,bcm2835-aux']
arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dtb: /soc/interrupt-controller at 7e00b200: failed to match any schema with compatible: ['brcm,bcm2836-armctrl-ic']