[PATCH 03/10] iio: adc: hx711: use struct with aligned_s64 timestamp

[Jonathan Cameron]

On Fri, 18 Apr 2025 14:58:22 -0500
David Lechner <dlechner at baylibre.com> wrote:

> Use a struct with aligned s64_timestamp instead of a padded array for
> the buffer used for iio_push_to_buffers_with_ts(). This makes it easier
> to see the correctness of the size and alignment of the buffer.
> 
> Signed-off-by: David Lechner <dlechner at baylibre.com>
This one is good and doesn't have the issue with moving timestamps.

Applied.
> ---
>  drivers/iio/adc/hx711.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
> index 8da0419ecfa3575aa54a93707c681ec8ced28be8..7235fa9e13d57c693751757c5d40e8a799622f17 100644
> --- a/drivers/iio/adc/hx711.c
> +++ b/drivers/iio/adc/hx711.c
> @@ -87,7 +87,10 @@ struct hx711_data {
>  	 * triggered buffer
>  	 * 2x32-bit channel + 64-bit naturally aligned timestamp
>  	 */
> -	u32			buffer[4] __aligned(8);
> +	struct {
> +		u32 channel[2];
> +		aligned_s64 timestamp;
> +	} buffer;
>  	/*
>  	 * delay after a rising edge on SCK until the data is ready DOUT
>  	 * this is dependent on the hx711 where the datasheet tells a
> @@ -361,15 +364,15 @@ static irqreturn_t hx711_trigger(int irq, void *p)
>  
>  	mutex_lock(&hx711_data->lock);
>  
> -	memset(hx711_data->buffer, 0, sizeof(hx711_data->buffer));
> +	memset(&hx711_data->buffer, 0, sizeof(hx711_data->buffer));
>  
>  	iio_for_each_active_channel(indio_dev, i) {
> -		hx711_data->buffer[j] = hx711_reset_read(hx711_data,
> +		hx711_data->buffer.channel[j] = hx711_reset_read(hx711_data,
>  					indio_dev->channels[i].channel);
>  		j++;
>  	}
>  
> -	iio_push_to_buffers_with_timestamp(indio_dev, hx711_data->buffer,
> +	iio_push_to_buffers_with_timestamp(indio_dev, &hx711_data->buffer,
>  							pf->timestamp);
>  
>  	mutex_unlock(&hx711_data->lock);
>