[PATCH 4/7] arm64: dts: ti: k3-j721s2-common-proc-board: Add main_i2c4 instance

Jayesh Choudhary j-choudhary at ti.com
Mon Apr 21 03:09:51 PDT 2025


Hello Udit,

On 19/04/25 14:53, Kumar, Udit wrote:
> 
> On 4/11/2025 4:21 PM, Jayesh Choudhary wrote:
>> Add dt node for main_i2c4 instance along with required pinmuxing.
>> Also add the gpio expander 'exp4' required by display connector.
>>
>> Signed-off-by: Jayesh Choudhary <j-choudhary at ti.com>
>> ---
>>   .../dts/ti/k3-j721s2-common-proc-board.dts    | 21 +++++++++++++++++++
>>   1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts 
>> b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> index e2fc1288ed07..f691ae4c19e6 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> @@ -148,6 +148,13 @@ J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* 
>> (AC27) MCASP2_AXR1.I2C3_SDA */
>>           >;
>>       };
>> +    main_i2c4_pins_default: main-i2c4-default-pins {
>> +        pinctrl-single,pins = <
>> +            J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) 
>> I2C4_SCL */
>> +            J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) 
>> I2C4_SDA */
>> +        >;
>> +    };
>> +
>>       main_i2c5_pins_default: main-i2c5-default-pins {
>>           pinctrl-single,pins = <
>>               J721S2_IOPAD(0x01c, PIN_INPUT, 8) /* (Y24) 
>> MCAN15_TX.I2C5_SCL */
>> @@ -370,6 +377,20 @@ exp2: gpio at 22 {
>>       };
>>   };
>> +&main_i2c4 {
>> +    status = "okay";
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&main_i2c4_pins_default>;
>> +    clock-frequency = <400000>;
>> +
>> +    exp4: gpio at 20 {
>> +        compatible = "ti,tca6408";
>> +        reg = <0x20>;
>> +        gpio-controller;
>> +        #gpio-cells = <2>;
> 
> I suggest to add, gpio-line-names as well for this gpio expander.
> 

Sure, I will add gpio-line-names.

> 
>> +    };
>> +};
>> +
>>   &main_i2c5 {
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&main_i2c5_pins_default>;


Thanks,
Jayesh



More information about the linux-arm-kernel mailing list