[PATCH v8 10/13] arm64: dts: Add overlay for RP1 device

[Andrea della Porta]

Hi Stefan,

On 13:38 Mon 14 Apr     , Stefan Wahren wrote:
> Hi Andrea,
> 
> just a nit. Could you please add "broadcom:" to the subject?

Consider it done.

Many thanks,
Andrea

> 
> Am 19.03.25 um 22:52 schrieb Andrea della Porta:
> > Define the RP1 node in an overlay. The inclusion tree is
> > as follow (the arrow points to the includer):
> > 
> >                        rp1.dtso
> >                            ^
> >                            |
> > rp1-common.dtsi ----> rp1-nexus.dtsi
> > 
> > Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
> > ---
> > This patch can be considered optional, since it fills just the second
> > scenario as detailed in [1], which is the RP1 DT node loaded from a dtb
> > overlay by the FW at early boot stage.
> > This may be useful for debug purpose, but as such not strictly necessary.
> > 
> > [1] https://lore.kernel.org/all/CAMEGJJ0f4YUgdWBhxvQ_dquZHztve9KO7pvQjoDWJ3=zd3cgcg@mail.gmail.com/#t
> > ---
> >   arch/arm64/boot/dts/broadcom/Makefile |  3 ++-
> >   arch/arm64/boot/dts/broadcom/rp1.dtso | 11 +++++++++++
> >   2 files changed, 13 insertions(+), 1 deletion(-)
> >   create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
> > 
> > diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
> > index 4836c6da5bee..58293f9c16ab 100644
> > --- a/arch/arm64/boot/dts/broadcom/Makefile
> > +++ b/arch/arm64/boot/dts/broadcom/Makefile
> > @@ -13,7 +13,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
> >   			      bcm2837-rpi-3-b.dtb \
> >   			      bcm2837-rpi-3-b-plus.dtb \
> >   			      bcm2837-rpi-cm3-io3.dtb \
> > -			      bcm2837-rpi-zero-2-w.dtb
> > +			      bcm2837-rpi-zero-2-w.dtb \
> > +			      rp1.dtbo
> >   subdir-y	+= bcmbca
> >   subdir-y	+= northstar2
> > diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
> > new file mode 100644
> > index 000000000000..ab4f146d22c0
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
> > @@ -0,0 +1,11 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +&pcie2 {
> > +	#address-cells = <3>;
> > +	#size-cells = <2>;
> > +
> > +	#include "rp1-nexus.dtsi"
> > +};
>