[PATCH v9 2/5] firmware: psci: Read and use vendor reset types
Lorenzo Pieralisi
lpieralisi at kernel.org
Wed Apr 16 05:05:44 PDT 2025
On Wed, Apr 09, 2025 at 11:48:24PM +0530, Shivendra Pratap wrote:
>
>
> On 4/8/2025 8:46 PM, Lorenzo Pieralisi wrote:
> > On Tue, Mar 25, 2025 at 07:33:36PM +0530, Mukesh Ojha wrote:
> >> On Fri, Mar 14, 2025 at 12:19:31PM +0100, Lorenzo Pieralisi wrote:
> >>> On Mon, Mar 03, 2025 at 01:08:31PM -0800, Elliot Berman wrote:
> >>>> From: Elliot Berman <elliot.berman at oss.qualcomm.com>
> >>>>
> >>>> SoC vendors have different types of resets and are controlled through
> >>>> various registers. For instance, Qualcomm chipsets can reboot to a
> >>>> "download mode" that allows a RAM dump to be collected. Another example
> >>>> is they also support writing a cookie that can be read by bootloader
> >>>> during next boot. PSCI offers a mechanism, SYSTEM_RESET2, for these
> >>>> vendor reset types to be implemented without requiring drivers for every
> >>>> register/cookie.
> >>>>
> >>>> Add support in PSCI to statically map reboot mode commands from
> >>>> userspace to a vendor reset and cookie value using the device tree.
> >>>
> >>> I have managed to discuss a little bit this patchset over the last
> >>> few days and I think we have defined a plan going forward.
> >>>
> >>> A point that was raised is:
> >>>
> >>> https://man7.org/linux/man-pages/man2/reboot.2.html
> >>>
> >>> LINUX_REBOOT_CMD_RESTART2 *arg command, what is it supposed to
> >>> represent ?
> >>>
> >>> Is it the mode the system should reboot into OR it is the
> >>> actual command to be issued (which is what this patchset
> >>> implements) ?
> >>>
> >>> LINUX_REBOOT_CMD_RESTART "..a default restart..."
> >>>
> >>> It is unclear what "default" means. We wonder whether the
> >>> reboot_mode variable was introduced to _define_ that "default".
> >>>
> >>> So, in short, my aim is trying to decouple reboot_mode from the
> >>> LINUX_REBOOT_CMD_RESTART2 *arg command.
> >>>
> >>> I believe that adding a sysfs interface to reboot-mode driver
> >>> infrastructure would be useful, so that the commands would
> >>> be exposed to userspace and userspace can set the *arg command
> >>> specifically to issue a given reset/mode.
> >>>
> >>> I wonder why this is not already in place for eg syscon-reboot-mode
> >>> resets, how does user space issue a command in those systems if the
> >>> available commands aren't exposed to userspace ?
> >>>
> >>> Is there a kernel entity exposing those "modes" to userspace, somehow ?
> >>>
> >>>> A separate initcall is needed to parse the devicetree, instead of using
> >>>> psci_dt_init because mm isn't sufficiently set up to allocate memory.
> >>>>
> >>>> Reboot mode framework is close but doesn't quite fit with the
> >>>> design and requirements for PSCI SYSTEM_RESET2. Some of these issues can
> >>>> be solved but doesn't seem reasonable in sum:
> >>>> 1. reboot mode registers against the reboot_notifier_list, which is too
> >>>> early to call SYSTEM_RESET2. PSCI would need to remember the reset
> >>>> type from the reboot-mode framework callback and use it
> >>>> psci_sys_reset.
> >>>> 2. reboot mode assumes only one cookie/parameter is described in the
> >>>> device tree. SYSTEM_RESET2 uses 2: one for the type and one for
> >>>> cookie.
> >>>
> >>> This can be changed and I think it should, so that the reboot modes
> >>> are exposed to user space and PSCI can use that.
> >>>
> >> In the case of a regular reboot or panic, the reboot/panic notifiers run
> >> first, followed by the restart notifiers. The PSCI reset/reset2 should
> >> be the last call from Linux, and ideally, this call should not fail.
> >>
> >> Reboot mode notifiers => restart notifiers or Panic notifiers => restart
> >> notifiers
> >>
> >> So, if I understand correctly, you mean that we can change the reboot
> >> mode framework to expose the arguments available to user space. We can
> >> extend it to accept magic and cookies, save them in the reboot
> >> framework, and retrieve them via a call from PSCI during a regular
> >> reboot or panic based on the current arguments. Is this leading towards
> >> writing an ARM-specific PSCI-reboot-mode driver, which in its reboot
> >> notifier callback saves the magic and cookies, and these magic and
> >> cookies will be used during psci_sys_reset2()? Or is there something
> >> wrong with my understanding?
> >
> > No, you got it right (apologies for the delay in replying) - if the
> > case for making reboot mode available to user space is accepted.
> >
>
> Agree that the available modes should be exposed to usespace via sysfs interface
> and we should implement it. Also #1 and #2 can be handled via some
> changes in the design as mentioned in above discussion.
>
> I have one doubt though when we implement this via reboot-mode framework.
> The current patch implements PSCI ARM PSCI SYSTEM RESET2 vendor reset types.
> psci driver is initialized very early at boot but potential ARM psci reboot-mode
> driver will not probe at that stage and the ARM PSCI SYSTEM RESET2 vendor reset
> types functionality will not be available in psci reset path until the reboot-mode
> driver probes. Will this cause any limitation on usage of ARM's PSCI vendor-reset
> types for early device resets?
>
> One use-case may be an early device crash or a early reset where a vendor
> wants to use PSCI SYSTEM RESET2 vendor reset type to a reset the device to a
> specific state but may not be able to use this driver.
> (eg: a kernel panic at early boot where a vendor wants to reset device
> to a specific state using vendor reset. Currently panic passes a NULL
> (*arg command) while device reset but it may be explored for vendor specific
> reset).
As you said, that would not be a PSCI only issue - *if* we wanted to
plug in this use case we should find a way to do it at reboot mode
driver level.
As a matter of fact, this is not a mainline issue AFAICS.
Even if we did not design this as a reboot mode driver there would be a
time window where you would not be able to use vendor resets on panic.
I don't see it as a major roadblock at the moment.
Thanks,
Lorenzo
>
> - Shivendra
>
> >> P.S. We appreciate Elliot for his work and follow-up on this while being
> >> employed at Qualcomm.
> >
> > Yes I sincerely do for his patience, thank you.
> >
> > Lorenzo
> >
> >>>> 3. psci cpuidle driver already registers a driver against the
> >>>> arm,psci-1.0 compatible. Refactoring would be needed to have both a
> >>>> cpuidle and reboot-mode driver.
> >>>>
> >>>> Signed-off-by: Elliot Berman <elliot.berman at oss.qualcomm.com>
> >>>> ---
> >>>> drivers/firmware/psci/psci.c | 105 +++++++++++++++++++++++++++++++++++++++++++
> >>>> 1 file changed, 105 insertions(+)
> >>>>
> >>>> diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
> >>>> index a1ebbe9b73b136218e9d9f9b8daa7756b3ab2fbe..6f8c47deaec0225f26704e1f3bcad52603127a85 100644
> >>>> --- a/drivers/firmware/psci/psci.c
> >>>> +++ b/drivers/firmware/psci/psci.c
> >>>> @@ -80,6 +80,14 @@ static u32 psci_cpu_suspend_feature;
> >>>> static bool psci_system_reset2_supported;
> >>>> static bool psci_system_off2_hibernate_supported;
> >>>>
> >>>> +struct psci_reset_param {
> >>>> + const char *mode;
> >>>> + u32 reset_type;
> >>>> + u32 cookie;
> >>>> +};
> >>>> +static struct psci_reset_param *psci_reset_params __ro_after_init;
> >>>> +static size_t num_psci_reset_params __ro_after_init;
> >>>> +
> >>>> static inline bool psci_has_ext_power_state(void)
> >>>> {
> >>>> return psci_cpu_suspend_feature &
> >>>> @@ -306,9 +314,39 @@ static int get_set_conduit_method(const struct device_node *np)
> >>>> return 0;
> >>>> }
> >>>>
> >>>> +static int psci_vendor_system_reset2(const char *cmd)
> >>>> +{
> >>>> + unsigned long ret;
> >>>> + size_t i;
> >>>> +
> >>>> + for (i = 0; i < num_psci_reset_params; i++) {
> >>>> + if (!strcmp(psci_reset_params[i].mode, cmd)) {
> >>>> + ret = invoke_psci_fn(PSCI_FN_NATIVE(1_1, SYSTEM_RESET2),
> >>>> + psci_reset_params[i].reset_type,
> >>>> + psci_reset_params[i].cookie, 0);
> >>>> + /*
> >>>> + * if vendor reset fails, log it and fall back to
> >>>> + * architecture reset types
> >>>
> >>> That's not what the code does.
> >>>
> >> Ack.
> >>
> >> -Mukesh
> >>
> >>>> + */
> >>>> + pr_err("failed to perform reset \"%s\": %ld\n", cmd,
> >>>> + (long)ret);
> >>>> + return 0;
> >>>> + }
> >>>> + }
> >>>> +
> >>>> + return -ENOENT;
> >>>> +}
> >>>> +
> >>>> static int psci_sys_reset(struct notifier_block *nb, unsigned long action,
> >>>> void *data)
> >>>> {
> >>>> + /*
> >>>> + * try to do the vendor system_reset2
> >>>> + * If there wasn't a matching command, fall back to architectural resets
> >>>> + */
> >>>> + if (data && !psci_vendor_system_reset2(data))
> >>>> + return NOTIFY_DONE;
> >>>> +
> >>>> if ((reboot_mode == REBOOT_WARM || reboot_mode == REBOOT_SOFT) &&
> >>>> psci_system_reset2_supported) {
> >>>> /*
> >>>> @@ -795,6 +833,73 @@ static const struct of_device_id psci_of_match[] __initconst = {
> >>>> {},
> >>>> };
> >>>>
> >>>> +#define REBOOT_PREFIX "mode-"
> >>>> +
> >>>> +static int __init psci_init_system_reset2_modes(void)
> >>>> +{
> >>>> + const size_t len = strlen(REBOOT_PREFIX);
> >>>> + struct psci_reset_param *param;
> >>>> + struct device_node *psci_np __free(device_node) = NULL;
> >>>> + struct device_node *np __free(device_node) = NULL;
> >>>> + struct property *prop;
> >>>> + size_t count = 0;
> >>>> + u32 magic[2];
> >>>> + int num;
> >>>> +
> >>>> + if (!psci_system_reset2_supported)
> >>>> + return 0;
> >>>> +
> >>>> + psci_np = of_find_matching_node(NULL, psci_of_match);
> >>>> + if (!psci_np)
> >>>> + return 0;
> >>>> +
> >>>> + np = of_find_node_by_name(psci_np, "reset-types");
> >>>> + if (!np)
> >>>> + return 0;
> >>>
> >>> Related to my initial question above. If LINUX_REBOOT_CMD_RESTART2 *arg command,
> >>> is the actual reset to be issued, should we add a default mode "cold"
> >>> and, if SYSTEM_RESET2 is supported, a "warm" reset mode too ?
> >>>
> >>> It all boils down to what *arg represents - adding "cold" and "warm"
> >>> modes would remove the dependency on reboot_mode for resets issued
> >>> through LINUX_REBOOT_CMD_RESTART2, the question is whether this
> >>> is the correct thing to do.
> >>>
> >>> Comments very welcome.
> >>>
> >>> Thanks,
> >>> Lorenzo
> >>>
> >>>> +
> >>>> + for_each_property_of_node(np, prop) {
> >>>> + if (strncmp(prop->name, REBOOT_PREFIX, len))
> >>>> + continue;
> >>>> + num = of_property_count_u32_elems(np, prop->name);
> >>>> + if (num != 1 && num != 2)
> >>>> + continue;
> >>>> +
> >>>> + count++;
> >>>> + }
> >>>> +
> >>>> + param = psci_reset_params =
> >>>> + kcalloc(count, sizeof(*psci_reset_params), GFP_KERNEL);
> >>>> + if (!psci_reset_params)
> >>>> + return -ENOMEM;
> >>>> +
> >>>> + for_each_property_of_node(np, prop) {
> >>>> + if (strncmp(prop->name, REBOOT_PREFIX, len))
> >>>> + continue;
> >>>> +
> >>>> + num = of_property_read_variable_u32_array(np, prop->name, magic,
> >>>> + 1, ARRAY_SIZE(magic));
> >>>> + if (num < 0) {
> >>>> + pr_warn("Failed to parse vendor reboot mode %s\n",
> >>>> + param->mode);
> >>>> + kfree_const(param->mode);
> >>>> + continue;
> >>>> + }
> >>>> +
> >>>> + param->mode = kstrdup_const(prop->name + len, GFP_KERNEL);
> >>>> + if (!param->mode)
> >>>> + continue;
> >>>> +
> >>>> + /* Force reset type to be in vendor space */
> >>>> + param->reset_type = PSCI_1_1_RESET_TYPE_VENDOR_START | magic[0];
> >>>> + param->cookie = num > 1 ? magic[1] : 0;
> >>>> + param++;
> >>>> + num_psci_reset_params++;
> >>>> + }
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +arch_initcall(psci_init_system_reset2_modes);
> >>>> +
> >>>> int __init psci_dt_init(void)
> >>>> {
> >>>> struct device_node *np;
> >>>>
> >>>> --
> >>>> 2.34.1
> >>>>
More information about the linux-arm-kernel
mailing list