[PATCH net-next] net: stmmac: dwc-qos: use PHY clock-stop capability

[Russell King (Oracle)]

Use the PHY clock-stop capability when programming the MAC LPI mode,
which allows the transmit clock to the PHY to be gated. Tested on the
Jetson Xavier NX platform.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
index 583b5c071cd1..fa900b4991d0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -252,7 +252,8 @@ static int tegra_eqos_probe(struct platform_device *pdev,
 	plat_dat->fix_mac_speed = tegra_eqos_fix_speed;
 	plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
 	plat_dat->bsp_priv = eqos;
-	plat_dat->flags |= STMMAC_FLAG_SPH_DISABLE;
+	plat_dat->flags |= STMMAC_FLAG_SPH_DISABLE |
+			   STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP;
 
 	return 0;
 
-- 
2.30.2