[PATCH v2 02/15] arm64: dts: freescale: imx93-phycore-som: Add EEPROM support

[Frank Li]

On Tue, Apr 15, 2025 at 06:32:58AM +0200, Primoz Fiser wrote:
> Add support for the EEPROM chip available on I2C3 bus (address 0x50),
> used for the PHYTEC SOM detection.
>
> Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
> ---

Reviewed-by: Frank Li <Frank.Li at nxp.com>

> Changes in v2:
> - move reg property ahead of pagesize
>
>  arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> index 507a71f9294b..0528e293c03d 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> @@ -154,6 +154,14 @@ ldo5: LDO5 {
>  			};
>  		};
>  	};
> +
> +	/* EEPROM */
> +	eeprom at 50 {
> +		compatible = "atmel,24c32";
> +		reg = <0x50>;
> +		pagesize = <32>;
> +		vcc-supply = <&buck4>;
> +	};
>  };
>
>  /* eMMC */
> --
> 2.34.1
>