[PATCH v7 01/11] arm64: dts: ti: k3-am62: Add ATCM and BTCM cbass ranges

[Judith Mendez]

Add cbass ranges for ATCM and BTCM on am62x device, without
these, remoteproc driver fails to probe and attach to the DM
r5 core and IPC communication is broken.

Signed-off-by: Judith Mendez <jm at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index bfb55ca113239..59f6dff552ed4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -86,7 +86,9 @@ cbass_main: bus at f0000 {
 			 /* Wakeup Domain Range */
 			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
-			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 
 		cbass_mcu: bus at 4000000 {
 			bootph-all;
@@ -103,7 +105,9 @@ cbass_wakeup: bus at b00000 {
 			#size-cells = <2>;
 			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
-				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 		};
 	};
 
-- 
2.49.0