[PATCH v2 4/6] i2c: pasemi: Improve error recovery

[Alyssa Rosenzweig]

Reviewed-by: Alyssa Rosenzweig <alyssa at rosenzweig.io>

Le Tue , Apr 15, 2025 at 03:36:58PM +0000, Sven Peter via B4 Relay a écrit :
> From: Hector Martin <marcan at marcan.st>
> 
> The hardware (supposedly) has a 25ms timeout for clock stretching
> and the driver uses 100ms which should be plenty. The error
> reocvery itself is however lacking.
> 
> Add handling for all the missing error condition, and better recovery in
> pasemi_smb_clear(). Also move the timeout to a #define since it's used
> in multiple places now.
> 
> Signed-off-by: Hector Martin <marcan at marcan.st>
> [sven: adjusted commit message after splitting the commit into two]
> Signed-off-by: Sven Peter <sven at svenpeter.dev>
> ---
>  drivers/i2c/busses/i2c-pasemi-core.c | 75 +++++++++++++++++++++++++++++++-----
>  1 file changed, 65 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c
> index 9b611dbdfef23e78a4ea75ac0311938d52b6ba96..2f31f039bedfd7f78d6572fe925125b1a6d0724b 100644
> --- a/drivers/i2c/busses/i2c-pasemi-core.c
> +++ b/drivers/i2c/busses/i2c-pasemi-core.c
> @@ -9,6 +9,7 @@
>  #include <linux/delay.h>
>  #include <linux/i2c.h>
>  #include <linux/io.h>
> +#include <linux/iopoll.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/pci.h>
> @@ -52,6 +53,12 @@
>  #define CTL_UJM		BIT(8)
>  #define CTL_CLK_M	GENMASK(7, 0)
>  
> +/*
> + * The hardware (supposedly) has a 25ms timeout for clock stretching, thus
> + * use 100ms here which should be plenty.
> + */
> +#define TRANSFER_TIMEOUT_MS	100
> +
>  static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val)
>  {
>  	dev_dbg(smbus->dev, "smbus write reg %x val %08x\n", reg, val);
> @@ -80,24 +87,44 @@ static void pasemi_reset(struct pasemi_smbus *smbus)
>  	reinit_completion(&smbus->irq_completion);
>  }
>  
> -static void pasemi_smb_clear(struct pasemi_smbus *smbus)
> +static int pasemi_smb_clear(struct pasemi_smbus *smbus)
>  {
>  	unsigned int status;
> +	int ret;
>  
> -	status = reg_read(smbus, REG_SMSTA);
> +	/* First wait for the bus to go idle */
> +	ret = readx_poll_timeout(ioread32, smbus->ioaddr + REG_SMSTA,
> +				 status, !(status & (SMSTA_XIP | SMSTA_JAM)),
> +				 USEC_PER_MSEC, USEC_PER_MSEC * TRANSFER_TIMEOUT_MS);
> +
> +	if (ret < 0) {
> +		dev_err(smbus->dev, "Bus is still stuck (status 0x%08x)\n", status);
> +		return -EIO;
> +	}
> +
> +	/* If any badness happened or there is data in the FIFOs, reset the FIFOs */
> +	if ((status & (SMSTA_MRNE | SMSTA_JMD | SMSTA_MTO | SMSTA_TOM | SMSTA_MTN | SMSTA_MTA)) ||
> +	    !(status & SMSTA_MTE))
> +		pasemi_reset(smbus);
> +
> +	/* Clear the flags */
>  	reg_write(smbus, REG_SMSTA, status);
> +
> +	return 0;
>  }
>  
>  static int pasemi_smb_waitready(struct pasemi_smbus *smbus)
>  {
> -	int timeout = 100;
> +	int timeout = TRANSFER_TIMEOUT_MS;
>  	int ret;
>  	unsigned int status;
>  
>  	if (smbus->use_irq) {
>  		reinit_completion(&smbus->irq_completion);
> -		reg_write(smbus, REG_IMASK, SMSTA_XEN | SMSTA_MTN);
> -		ret = wait_for_completion_timeout(&smbus->irq_completion, msecs_to_jiffies(100));
> +		/* XEN should be set when a transaction terminates, whether due to error or not */
> +		reg_write(smbus, REG_IMASK, SMSTA_XEN);
> +		ret = wait_for_completion_timeout(&smbus->irq_completion,
> +						  msecs_to_jiffies(timeout));
>  		reg_write(smbus, REG_IMASK, 0);
>  		status = reg_read(smbus, REG_SMSTA);
>  
> @@ -123,9 +150,35 @@ static int pasemi_smb_waitready(struct pasemi_smbus *smbus)
>  		}
>  	}
>  
> +	/* Controller timeout? */
> +	if (status & SMSTA_TOM) {
> +		dev_warn(smbus->dev, "Controller timeout, status 0x%08x\n", status);
> +		return -EIO;
> +	}
> +
> +	/* Peripheral timeout? */
> +	if (status & SMSTA_MTO) {
> +		dev_warn(smbus->dev, "Peripheral timeout, status 0x%08x\n", status);
> +		return -ETIME;
> +	}
> +
> +	/* Still stuck in a transaction? */
> +	if (status & SMSTA_XIP) {
> +		dev_warn(smbus->dev, "Bus stuck, status 0x%08x\n", status);
> +		return -EIO;
> +	}
> +
> +	/* Arbitration loss? */
> +	if (status & SMSTA_MTA) {
> +		dev_warn(smbus->dev, "Arbitration loss, status 0x%08x\n", status);
> +		return -EBUSY;
> +	}
> +
>  	/* Got NACK? */
> -	if (status & SMSTA_MTN)
> +	if (status & SMSTA_MTN) {
> +		dev_warn(smbus->dev, "NACK, status 0x%08x\n", status);
>  		return -ENXIO;
> +	}
>  
>  	/* Clear XEN */
>  	reg_write(smbus, REG_SMSTA, SMSTA_XEN);
> @@ -187,9 +240,9 @@ static int pasemi_i2c_xfer(struct i2c_adapter *adapter,
>  	struct pasemi_smbus *smbus = adapter->algo_data;
>  	int ret, i;
>  
> -	pasemi_smb_clear(smbus);
> -
> -	ret = 0;
> +	ret = pasemi_smb_clear(smbus);
> +	if (ret)
> +		return ret;
>  
>  	for (i = 0; i < num && !ret; i++)
>  		ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1)));
> @@ -210,7 +263,9 @@ static int pasemi_smb_xfer(struct i2c_adapter *adapter,
>  	addr <<= 1;
>  	read_flag = read_write == I2C_SMBUS_READ;
>  
> -	pasemi_smb_clear(smbus);
> +	err = pasemi_smb_clear(smbus);
> +	if (err)
> +		return err;
>  
>  	switch (size) {
>  	case I2C_SMBUS_QUICK:
> 
> -- 
> 2.34.1
> 
>