[PATCH v3 6/7] arm64: dts: ti: k3-am62x: Rename I2C switch to I2C mux in IMX219 overlay

[Yemike Abhilash Chandra]

The IMX219 device tree overlay incorrectly defined an I2C switch instead
of an I2C mux. According to the DT bindings, the correct terminology and
node definition should use "i2c-mux" instead of "i2c-switch". Hence,
update the same to avoid dtbs_check warnings.

Fixes: 4111db03dc05 ("arm64: dts: ti: k3-am62x: Add overlay for IMX219")
Cc: stable at vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra at ti.com>
Reviewed-by: Neha Malcom Francis <n-francis at ti.com>
Reviewed-by: Jai Luthra <jai.luthra at linux.dev>
---
 arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 7a0d35eb04d3..dd090813a32d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -22,7 +22,7 @@ &main_i2c2 {
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch at 71 {
+	i2c-mux at 71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.34.1