[PATCH v5 3/3] drivers/thermal/exymos: Fixed the efuse min max value for exynos5422

[Lukasz Luba]

On 4/10/25 07:37, Anand Moon wrote:
> As per Exynos5422 user manual e-Fuse range min~max range is 16~76.
> if e-Fuse value is out of this range, then thermal sensor may not
> sense thermal data properly. Refactors the efuse value
> initialization logic within exynos_map_dt_data function by
> replacing the nested if-else statements with a switch statement.
> Ensures proper initialization of efuse values based on the SOC type.
> 
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
> v5: None
> v4: None
> v3: Improve the logic to convert if/else to switch
> ---
>   drivers/thermal/samsung/exynos_tmu.c | 19 +++++++++++++++----
>   1 file changed, 15 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index ac3b9d2c900c..a71cde0a4b17 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -899,12 +899,23 @@ static int exynos_map_dt_data(struct platform_device *pdev)
>   		data->gain = 8;
>   		data->reference_voltage = 16;
>   		data->efuse_value = 55;
> -		if (data->soc != SOC_ARCH_EXYNOS5420 &&
> -		    data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
> +		data->max_efuse_value = 100;
> +		switch (data->soc) {
> +		case SOC_ARCH_EXYNOS3250:
> +		case SOC_ARCH_EXYNOS4412:
> +		case SOC_ARCH_EXYNOS5250:
> +		case SOC_ARCH_EXYNOS5260:
>   			data->min_efuse_value = 40;
> -		else
> +			break;
> +		case SOC_ARCH_EXYNOS5420:
> +		case SOC_ARCH_EXYNOS5420_TRIMINFO:
> +			data->min_efuse_value = 16;
> +			data->max_efuse_value = 76;
> +			break;
> +		default:
>   			data->min_efuse_value = 0;
> -		data->max_efuse_value = 100;
> +			break;
> +		}
>   		break;
>   	case SOC_ARCH_EXYNOS5433:
>   		data->tmu_set_low_temp = exynos5433_tmu_set_low_temp;

I should have added that in earlier version: LGTM,

Reviewed-by: Lukasz Luba <lukasz.luba at arm.com>