[PATCH v2] pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines

[Linus Walleij]

On Tue, Apr 1, 2025 at 3:50 PM Christian Marangi <ansuelsmth at gmail.com> wrote:

> The current PHY2 LED define are wrong and actually set BITs outside the
> related mask. Fix it and set the correct value. While at it, also use
> FIELD_PREP_CONST macro to make it simple to understand what values are
> actually applied for the mask.
>
> Also fix wrong PHY LED mapping. The SoC Switch supports up to 4 port but
> the register define mapping for 5 PHY port, starting from 0. The mapping
> was wrongly defined starting from PHY1. Reorder the function group to
> start from PHY0. PHY4 is actually never supported as we don't have a
> GPIO pin to assign.
>
> Cc: stable at vger.kernel.org
> Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
> Reviewed-by: Benjamin Larsson <benjamin.larsson at genexis.eu>
> Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>

Patch applied for fixes.

Sorry for the delay!

Yours,
Linus Walleij