[PATCH net-next v5 3/3] net: stmmac: Add DWMAC glue layer for Renesas GBETH

Lad, Prabhakar prabhakar.csengg at gmail.com
Mon Apr 14 11:14:42 PDT 2025


Hi Russell,

On Mon, Apr 14, 2025 at 5:57 PM Russell King (Oracle)
<linux at armlinux.org.uk> wrote:
>
> On Mon, Apr 07, 2025 at 01:03:17PM +0100, Prabhakar wrote:
> > +     gbeth->rstc = devm_reset_control_get_exclusive(dev, NULL);
> > +     if (IS_ERR(gbeth->rstc))
> > +             return PTR_ERR(gbeth->rstc);
> > +
> > +     gbeth->dev = dev;
> > +     gbeth->regs = stmmac_res.addr;
> > +     gbeth->plat_dat = plat_dat;
> > +     plat_dat->bsp_priv = gbeth;
> > +     plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
> > +     plat_dat->clks_config = renesas_gbeth_clks_config;
> > +     plat_dat->flags |= STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY |
> > +                        STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP |
> > +                        STMMAC_FLAG_SPH_DISABLE;
> > +
> > +     err = renesas_gbeth_clks_config(gbeth, true);
> > +     if (err)
> > +             return err;
> > +
> > +     err = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
> > +     if (err)
> > +             renesas_gbeth_clks_config(gbeth, false);
> > +
> > +     return err;
> > +}
> > +
> > +static void renesas_gbeth_remove(struct platform_device *pdev)
> > +{
> > +     stmmac_dvr_remove(&pdev->dev);
> > +
> > +     renesas_gbeth_clks_config(get_stmmac_bsp_priv(&pdev->dev), false);
> > +}
>
> Would calling renesas_gbeth_clks_config() in the suspend/resume paths
> cause problems?
>
> If not, please consider using plat_dat->init() and plat_dat->exit()
> to control these clocks, and then use devm_stmmac_pltfr_probe()
> which will call the ->init and ->exit functions around the probe
> as necessary and at removal time (and you won't need the remove
> method.)
>
I'll test this on the platform which can support suspend/resume and
update accordingly.

Cheers,
Prabhakar



More information about the linux-arm-kernel mailing list