[PATCH v8 09/13] arm64: dts: Add board DTS for Rpi5 which includes RP1 node

[Stefan Wahren]

Hi Andrea,

Am 19.03.25 um 22:52 schrieb Andrea della Porta:
> Add the board 'monolithic' DTS for RaspberryPi 5 which includes
> the RP1 node definition.  The inclusion treeis as follow (the
> arrow points to the includer):
>
> rp1-common.dtsi ----> rp1-nexus.dtsi ----> bcm2712-rpi-5-b-monolithic.dts
>                                                 ^
>                                                 |
>                                             bcm2712-rpi-5-b.dts
sorry for the delay. I'm not happy with the monolithic appendix.

How about bcm2712-rpi-5-b-rp1.dts or something more self-explaining?Regards
> This is designed to maximize the compatibility with downstream DT
> while ensuring that a fully defined DT (one which includes the RP1
> node as opposed to load it from overlay at runtime) is present
> since early boot stage.
>
> Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
> ---
> Right now bcm2712-rpi-5-b.dts is the overlay-ready DT which will make
> the RP1 driver to load the RP1 dtb overlay at runtime, while
> bcm2712-rpi-5-b-monolithic.dts is the fully defined one (i.e. it
> already contains RP1 node, so no overlay is loaded nor needed).
> Depending on which one we want to be considered the default, we can
> swap the file names to align with downstream naming convention that
> has only the fully defined DT called bcm2712-rpi-5-b.dts.
Could you please move some of this good explanation into this dts file 
as comment?
> ---
>   arch/arm64/boot/dts/broadcom/Makefile                     | 1 +
>   .../boot/dts/broadcom/bcm2712-rpi-5-b-monolithic.dts      | 8 ++++++++
>   2 files changed, 9 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-monolithic.dts
>
> diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
> index 3d0efb93b06d..4836c6da5bee 100644
> --- a/arch/arm64/boot/dts/broadcom/Makefile
> +++ b/arch/arm64/boot/dts/broadcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
>   			      bcm2711-rpi-4-b.dtb \
>   			      bcm2711-rpi-cm4-io.dtb \
>   			      bcm2712-rpi-5-b.dtb \
> +			      bcm2712-rpi-5-b-monolithic.dtb \
>   			      bcm2712-d-rpi-5-b.dtb \
>   			      bcm2837-rpi-3-a-plus.dtb \
>   			      bcm2837-rpi-3-b.dtb \
> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-monolithic.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-monolithic.dts
> new file mode 100644
> index 000000000000..3aeee678b0bc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-monolithic.dts
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/dts-v1/;
> +
> +#include "bcm2712-rpi-5-b.dts"
> +
> +&pcie2 {
> +	#include "rp1-nexus.dtsi"
> +};