[PATCH v2 4/7] arm64: dts: ti: k3-j721e-sk: Add requiried voltage supplies for IMX219

[Yemike Abhilash Chandra]

Hi Neha,

On 11/04/25 19:08, Francis, Neha wrote:
> On 4/9/2025 7:11 PM, Yemike Abhilash Chandra wrote:
>> The device tree overlay for the IMX219 sensor requires three voltage
>> supplies to be defined: VANA (analog), VDIG (digital core), and VDDL
>> (digital I/O). Add the corresponding voltage supply definitions to avoid
>> dtbs_check warnings.
>>
>> Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
>> Cc: stable at vger.kernel.org
>> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra at ti.com>
>> ---
>>   .../dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso  | 33 +++++++++++++++++++
>>   1 file changed, 33 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
>> index 4a395d1209c8..4eb3cffab032 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
> 
> The link to the schematics seems to need updation, would like to see where these
> regulators are mentioned, can't find them in [0] which I assume is the latest link.
> 

Yes, It seems that the link to the schematics has been changed.
I will submit a separate patch to fix that.

While the regulators are not clearly documented in the schematics,
the voltage levels can be observed in the top-right corner of the 
schematics.

However, the required regulators are explicitly described in the device 
tree bindings.
Please refer: ./Documentation/devicetree/bindings/media/i2c/imx219.yaml

Thanks and Regards
Yemike Abhilash Chandra


>> @@ -19,6 +19,33 @@ clk_imx219_fixed: imx219-xclk {
>>   		#clock-cells = <0>;
>>   		clock-frequency = <24000000>;
>>   	};
>> +
>> +	reg_2p8v: regulator-2p8v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "2P8V";
>> +		regulator-min-microvolt = <2800000>;
>> +		regulator-max-microvolt = <2800000>;
>> +		vin-supply = <&vdd_sd_dv>;
>> +		regulator-always-on;
>> +	};
>> +
>> +	reg_1p8v: regulator-1p8v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "1P8V";
>> +		regulator-min-microvolt = <1800000>;
>> +		regulator-max-microvolt = <1800000>;
>> +		vin-supply = <&vdd_sd_dv>;
>> +		regulator-always-on;
>> +	};
>> +
>> +	reg_1p2v: regulator-1p2v {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "1P2V";
>> +		regulator-min-microvolt = <1200000>;
>> +		regulator-max-microvolt = <1200000>;
>> +		vin-supply = <&vdd_sd_dv>;
>> +		regulator-always-on;
>> +	};
>>   };
>>   
>>   &csi_mux {
>> @@ -34,6 +61,9 @@ imx219_0: imx219-0 at 10 {
>>   		reg = <0x10>;
>>   
>>   		clocks = <&clk_imx219_fixed>;
>> +		VANA-supply = <&reg_2p8v>;
>> +		VDIG-supply = <&reg_1p8v>;
>> +		VDDL-supply = <&reg_1p2v>;
>>   
>>   		port {
>>   			csi2_cam0: endpoint {
>> @@ -55,6 +85,9 @@ imx219_1: imx219-1 at 10 {
>>   		reg = <0x10>;
>>   
>>   		clocks = <&clk_imx219_fixed>;
>> +		VANA-supply = <&reg_2p8v>;
>> +		VDIG-supply = <&reg_1p8v>;
>> +		VDDL-supply = <&reg_1p2v>;
>>   
>>   		port {
>>   			csi2_cam1: endpoint {
> [0] https://datasheets.raspberrypi.com/camera/camera-module-2-schematics.pdf
>