[PATCH v5 2/7] PCI: imx6: Skip one dw_pcie_wait_for_link() in workaround link training

[Manivannan Sadhasivam]

On Tue, Apr 08, 2025 at 10:59:25AM +0800, Richard Zhu wrote:
> Remove one reduntant dw_pcie_wait_for_link() in link traning workaround
> because common framework already do that.
> 
> Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

- Mani

> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 15 ++++-----------
>  1 file changed, 4 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index a4c0714c6468..c5871c3d4194 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -881,11 +881,11 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
>  	/* Start LTSSM. */
>  	imx_pcie_ltssm_enable(dev);
>  
> -	ret = dw_pcie_wait_for_link(pci);
> -	if (ret)
> -		goto err_reset_phy;
> -
>  	if (pci->max_link_speed > 1) {
> +		ret = dw_pcie_wait_for_link(pci);
> +		if (ret)
> +			goto err_reset_phy;
> +
>  		/* Allow faster modes after the link is up */
>  		dw_pcie_dbi_ro_wr_en(pci);
>  		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> @@ -907,17 +907,10 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
>  			dev_err(dev, "Failed to bring link up!\n");
>  			goto err_reset_phy;
>  		}
> -
> -		/* Make sure link training is finished as well! */
> -		ret = dw_pcie_wait_for_link(pci);
> -		if (ret)
> -			goto err_reset_phy;
>  	} else {
>  		dev_info(dev, "Link: Only Gen1 is enabled\n");
>  	}
>  
> -	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
> -	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
>  	return 0;
>  
>  err_reset_phy:
> -- 
> 2.37.1
> 

-- 
மணிவண்ணன் சதாசிவம்