[PATCH] arm64: dts: ti: k3-am67a-beagley-ai: Add bootph for main_gpio1

[Nishanth Menon]

main_gpio1 controls the voltage for the SDcard from 3.3v to 1.8v.
This is required for proper operation of SDcard through various boot
stages.

Fixes: c5e615963bbe ("arm64: dts: ti: Add k3-am67a-beagley-ai")
Signed-off-by: Nishanth Menon <nm at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index 9be6bba28c26..bf9b23df1da2 100644
--- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -309,6 +309,7 @@ &cpsw_port1 {
 };
 
 &main_gpio1 {
+	bootph-all;
 	status = "okay";
 };
 
-- 
2.47.0