[PATCH v2 2/2] arm64: dts: ti: k3-j722s-main: Disable "serdes_wiz0" and "serdes_wiz1"

[Kumar, Udit]

On 4/8/2025 4:06 PM, Siddharth Vadapalli wrote:
> Since "serdes0" and "serdes1" which are the sub-nodes of "serdes_wiz0"
> and "serdes_wiz1" respectively, have been disabled in the SoC file already,
> and, given that these sub-nodes will only be enabled in a board file if the
> board utilizes any of the SERDES instances and the peripherals bound to
> them, we end up in a situation where the board file doesn't explicitly
> disable "serdes_wiz0" and "serdes_wiz1". As a consequence of this, the
> following errors show up when booting Linux:
>
>    wiz bus at f0000:phy at f000000: probe with driver wiz failed with error -12
>    ...
>    wiz bus at f0000:phy at f010000: probe with driver wiz failed with error -12
>
> To not only fix the above, but also, in order to follow the convention of
> disabling device-tree nodes in the SoC file and enabling them in the board
> files for those boards which require them, disable "serdes_wiz0" and
> "serdes_wiz1" device-tree nodes.
>
> Fixes: 628e0a0118e6 ("arm64: dts: ti: k3-j722s-main: Add SERDES and PCIe support")
> Cc: stable at vger.kernel.org
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> ---
>
> v1 of this patch is at:
> https://lore.kernel.org/r/20250408060636.3413856-3-s-vadapalli@ti.com/
> Changes since v1:
> - Added "Fixes" tag and updated commit message accordingly.
>
> Regards,
> Siddharth.
>
>   arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> index 6850f50530f1..beda9e40e931 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> @@ -32,6 +32,8 @@ serdes_wiz0: phy at f000000 {
>   		assigned-clocks = <&k3_clks 279 1>;
>   		assigned-clock-parents = <&k3_clks 279 5>;
>   
> +		status = "disabled";
> +

Since you are disabling parent node.

Do you still want to carry status = "disabled" in child nodes serdes0 
and serdes1.


>   		serdes0: serdes at f000000 {
>   			compatible = "ti,j721e-serdes-10g";
>   			reg = <0x0f000000 0x00010000>;
> @@ -70,6 +72,8 @@ serdes_wiz1: phy at f010000 {
>   		assigned-clocks = <&k3_clks 280 1>;
>   		assigned-clock-parents = <&k3_clks 280 5>;
>   
> +		status = "disabled";
> +
>   		serdes1: serdes at f010000 {
>   			compatible = "ti,j721e-serdes-10g";
>   			reg = <0x0f010000 0x00010000>;