[PATCH v1 6/6] phy: amlogic: phy-meson-axg-pcie: Fix PHY creation order in axg-pcie probe

[Neil Armstrong]

On 10/04/2025 15:33, Anand Moon wrote:
> Reorder the PHY creation in the axg-pcie probe function to ensure all
> the resource is mapped before creating the PHY. This change addresses
> the issue where the PHY creation was attempted before
> mapping the necessary resources, potentially causing failures.
> 
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
>   drivers/phy/amlogic/phy-meson-axg-pcie.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c
> index 54baf7b8930e1..14dee73f9cb57 100644
> --- a/drivers/phy/amlogic/phy-meson-axg-pcie.c
> +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c
> @@ -136,11 +136,6 @@ static int phy_axg_pcie_probe(struct platform_device *pdev)
>   	if (!priv)
>   		return -ENOMEM;
>   
> -	priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops);
> -	if (IS_ERR(priv->phy))
> -		return dev_err_probe(dev, PTR_ERR(priv->phy),
> -				     "failed to create PHY\n");
> -
>   	base = devm_platform_ioremap_resource(pdev, 0);
>   	if (IS_ERR(base))
>   		return PTR_ERR(base);
> @@ -158,6 +153,11 @@ static int phy_axg_pcie_probe(struct platform_device *pdev)
>   	if (IS_ERR(priv->analog))
>   		return PTR_ERR(priv->analog);
>   
> +	priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops);
> +	if (IS_ERR(priv->phy))
> +		return dev_err_probe(dev, PTR_ERR(priv->phy),
> +				     "failed to create PHY\n");
> +
>   	phy_set_drvdata(priv->phy, priv);
>   	dev_set_drvdata(dev, priv);
>   	pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>