[PATCH v6 06/11] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
Judith Mendez
jm at ti.com
Thu Apr 10 10:44:45 PDT 2025
Hi Beleswar,
On 4/10/25 3:55 AM, Beleswar Prasad Padhi wrote:
> Hi Judith,
>
> On 10/04/25 04:02, Judith Mendez wrote:
>> Hi Beleswar,
>>
>> On 4/7/25 11:00 PM, Beleswar Prasad Padhi wrote:
>>> Hi Judith, Andrew,
>>>
>>> On 07/04/25 19:43, Judith Mendez wrote:
>>>> Hi Devarsh,
>>>>
>>>> On 4/7/25 8:54 AM, Devarsh Thakkar wrote:
>>>>> Hi Judith,
>>>>>
>>>>> On 05/04/25 05:45, Judith Mendez wrote:
>>>>> > From: Devarsh Thakkar <devarsht at ti.com>
>>>>>>
>>>>>
>>>>> Thanks for the patch.
>>>>>
>>>>>> For each remote proc, reserve memory for IPC and bind the mailbox
>>>>>> assignments. Two memory regions are reserved for each remote
>>>>>> processor.
>>>>>> The first region of 1MB of memory is used for Vring shared buffers
>>>>>> and the second region is used as external memory to the remote
>>>>>> processor
>>>>>> for the resource table and for tracebuffer allocations.
>>>>>>
>>>>>> Signed-off-by: Devarsh Thakkar <devarsht at ti.com>
>>>>>> Signed-off-by: Hari Nagalla <hnagalla at ti.com>
>>>>>> Signed-off-by: Judith Mendez <jm at ti.com>
>>>>>> ---
>>>>>> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 96
>>>>>> +++++++++++++++++++++++--
>>>>>> 1 file changed, 90 insertions(+), 6 deletions(-)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>>>>>> b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>>>>>> index 1c9d95696c839..7d817b447c1d0 100644
>>>>>> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>>>>>> @@ -52,6 +52,42 @@ linux,cma {
>>>>>> linux,cma-default;
>>>>>> };
>>>>>> + c7x_0_dma_memory_region: c7x-dma-memory at 99800000 {
>>>>>> + compatible = "shared-dma-pool";
>>>>>> + reg = <0x00 0x99800000 0x00 0x100000>;
>>>>>> + no-map;
>>>>>> + };
>>>>>> +
>>>>>> + c7x_0_memory_region: c7x-memory at 99900000 {
>>>>>> + compatible = "shared-dma-pool";
>>>>>> + reg = <0x00 0x99900000 0x00 0xf00000>;
>>>>>> + no-map;
>>>>>> + };
>>>>>> +
>>>>>> + mcu_r5fss0_core0_dma_memory_region:
>>>>>> r5f-dma-memory at 9b800000 {
>>>>>> + compatible = "shared-dma-pool";
>>>>>> + reg = <0x00 0x9b800000 0x00 0x100000>;
>>>>>> + no-map;
>>>>>> + };
>>>>>> +
>>>>>> + mcu_r5fss0_core0_memory_region: r5f-dma-memory at 9b900000 {
>>>>>> + compatible = "shared-dma-pool";
>>>>>> + reg = <0x00 0x9b900000 0x00 0xf00000>;
>>>>>> + no-map;
>>>>>> + };
>>>>>> +
>>>>>> + wkup_r5fss0_core0_dma_memory_region:
>>>>>> r5f-dma-memory at 9c800000 {
>>>>>> + compatible = "shared-dma-pool";
>>>>>> + reg = <0x00 0x9c800000 0x00 0x100000>;
>>>>>> + no-map;
>>>>>> + };
>>>>>> +
>>>>>> + wkup_r5fss0_core0_memory_region: r5f-dma-memory at 9c900000 {
>>>>>> + compatible = "shared-dma-pool";
>>>>>> + reg = <0x00 0x9c900000 0x00 0xf00000>;
>>>>>> + no-map;
>>>>>> + };
>>>>>> +
>>>>>> secure_tfa_ddr: tfa at 9e780000 {
>>>>>> reg = <0x00 0x9e780000 0x00 0x80000>;
>>>>>> alignment = <0x1000>;
>>>>>> @@ -63,12 +99,6 @@ secure_ddr: optee at 9e800000 {
>>>>>> alignment = <0x1000>;
>>>>>> no-map;
>>>>>> };
>>>>>> -
>>>>>> - wkup_r5fss0_core0_memory_region: r5f-dma-memory at 9c900000 {
>>>>>> - compatible = "shared-dma-pool";
>>>>>> - reg = <0x00 0x9c900000 0x00 0x01e00000>;
>>>>>> - no-map;
>>>>>> - };
>>>>>> };
>>>>>
>>>>> This is missing the edgeAI specific remote-core carveouts and
>>>>> RTOS-to-RTOS IPC memory regions [1] being used by edgeAI firmwares
>>>>> which come as pre-packaged in the official SDK release for AM62A.
>>>>>
>>>>> There is only one official SDK release for AM62A (which is edgeAI
>>>>> based) [2] which packages these edgeAI remoteproc firmwares and in
>>>>> my view it is a fair expectation that remote core careveouts in
>>>>> device-tree should align with firmwares released in SDK.
>>>>>
>>>>> This is because most developers (including me) and vendors download
>>>>> this official SDK release and use it with latest upstream kernel
>>>>> and modules (right now we are applying required patches locally)
>>>>> and this patch won't suffice for this, in-fact it won't work since
>>>>> the remoteproc firmwares are already using regions beyond the
>>>>> reserved-regions from this patch.
>>>>
>>>> I understand your point, currently with this patch remoteproc loading
>>>> will not work for some cores. However, the goal here is to standardize
>>>> as much as possible the memory carveout sizes, push the "demo firmware"
>>>> to request resources the correct way from resource table,
>>>
>>>
>>> It is indeed more suitable if the memory carveouts are called out in
>>> the resource table of the firmware. But you will still need to
>>> reserve that memory sections in the Device Tree so that Kernel does
>>> not map that memory for anything else. So I am thinking how moving to
>>> resource table will help solve this problem?
>>
>> The point is that our default FW is doing things incorrectly. We want to
>> push the existing FW to
>> 1. Request resources via resource table.
>> 2. Fix their memory requirements (recent offline discussion proved that
>> FW is requesting more than it needs)
>> 3. FW should adapt to Linux not Linux adapt to FW
>
>
> Thanks. I also agree with you on all of the above points for a standard
> firmware.
>
> However, I was referring to this problem:
> Can we get rid of static reserved memory carveouts in DT?
> People using a custom firmware will have to patch the Device Tree to
> reserve larger/different memory regions. Is there some way where the
> firmware can dictate the "reserved" memory carveouts at runtime? Memory
> carveouts can be announced through Resource Table, but there is no
> guarantee we will be able to allocate it (it could be mapped by the
> Kernel for some other alloc), unless its pre-reserved in DT.
>
Since we do not have an IOMMU for remote cores in K3, we cannot get rid
of the static reserved memory carveouts, is my understanding. The linux
driver would have programmed the IOMMU virtual and physical addresses
and it would have been able to do the virtual to physical address
translation on its own with only the requirement size from the FW
resource table. Since we do not have this flexibility provided with
IOMMU, we must have static reserved carveouts so that Linux will not
touch these memory regions. The firmware virtual address to physical
adress is atm a one to one mapping. So in summary, we must have these
static reserved memory carveouts, but we should fix the default FW
to use the "standardized" sizes and request SRAM via resource table.
~ Judith
> Thanks,
> Beleswar
>
>>
>> If not, then then we should try to move to Zephyr firmware or other/
>> better options.
>>
>> Hope I am able to explain myself better this time around.
>>
>> ~ Judith
>>
>>>
>>> Thanks,
>>> Beleswar
>>>
>>>> and move away
>>>> from this dependency and limitations that we have with our firmware. We
>>>> should soon be able to generate our own firmware using Zephyr, which
>>>> Andrew is pioneering, so with this firmware we should move to the
>>>> correct direction upstream. Downstream we are still using the memory
>>>> carveout sizes that the firmware folk want so desperately to keep, for
>>>> now..
>>>>
>>>> ~ Judith
>>>>
>>>>>
>>>>> [1]:
>>>>> https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts?h=ti-linux-6.6.y-cicd#n103
>>>>> [2]: https://www.ti.com/tool/PROCESSOR-SDK-AM62A
>>>>>
>>>>> Regards
>>>>> Devarsh
>>>>>
>>>>>> opp-table {
>>>>>> @@ -741,3 +771,57 @@ dpi1_out: endpoint {
>>>>>> };
>>>>>> };
>>>>>> };
>>>>>> +
>>>>>> +&mailbox0_cluster0 {
>>>>>> + status = "okay";
>>>>>> +
>>>>>> + mbox_r5_0: mbox-r5-0 {
>>>>>> + ti,mbox-rx = <0 0 0>;
>>>>>> + ti,mbox-tx = <1 0 0>;
>>>>>> + };
>>>>>> +};
>>>>>> +
>>>>>> +&mailbox0_cluster1 {
>>>>>> + status = "okay";
>>>>>> +
>>>>>> + mbox_c7x_0: mbox-c7x-0 {
>>>>>> + ti,mbox-rx = <0 0 0>;
>>>>>> + ti,mbox-tx = <1 0 0>;
>>>>>> + };
>>>>>> +};
>>>>>> +
>>>>>> +&mailbox0_cluster2 {
>>>>>> + status = "okay";
>>>>>> +
>>>>>> + mbox_mcu_r5_0: mbox-mcu-r5-0 {
>>>>>> + ti,mbox-rx = <0 0 0>;
>>>>>> + ti,mbox-tx = <1 0 0>;
>>>>>> + };
>>>>>> +};
>>>>>> +
>>>>>> +&wkup_r5fss0 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&wkup_r5fss0_core0 {
>>>>>> + mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
>>>>>> + memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
>>>>>> + <&wkup_r5fss0_core0_memory_region>;
>>>>>> +};
>>>>>> +
>>>>>> +&mcu_r5fss0 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&mcu_r5fss0_core0 {
>>>>>> + mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
>>>>>> + memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
>>>>>> + <&mcu_r5fss0_core0_memory_region>;
>>>>>> +};
>>>>>> +
>>>>>> +&c7x_0 {
>>>>>> + mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
>>>>>> + memory-region = <&c7x_0_dma_memory_region>,
>>>>>> + <&c7x_0_memory_region>;
>>>>>> + status = "okay";
>>>>>> +};
>>>>>
>>>>
>>
More information about the linux-arm-kernel
mailing list