[PATCH 08/13] arm64: dts: freescale: imx93-phyboard-segin: Fix SD-card pinctrl

[Frank Li]

On Thu, Apr 10, 2025 at 11:02:46AM +0200, Primoz Fiser wrote:
> Until now, all usdhc2 (SD-card) pinctrl labels pointed to one pinctrl
> group "usdhc2grp" which was overwritten twice by the 100 and 200 MHz
> modes. Fix this by using unique pinctrl names.
>
> While at it, apply i.MX93 chip errata ERR052021 workaround and adjust

Errata link here!

> pinctrl drive-strengths to improve signal integrity. Drive-strength
> values come from the downstream PHYTEC kernel and were devised and
> verified by the hardware department measurements.
>
> Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
> ---
>  .../dts/freescale/imx93-phyboard-segin.dts    | 47 ++++++++++---------
>  1 file changed, 25 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
> index 3d5cd0561362..525f52789f8b 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
> @@ -75,39 +75,42 @@ MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
>  		>;
>  	};
>
> +	/* need to config the SION for data and cmd pad, refer to ERR052021 */

errata's implement need seperate patch

Frank
>  	pinctrl_usdhc2_default: usdhc2grp {
>  		fsl,pins = <
> -			MX93_PAD_SD2_CLK__USDHC2_CLK		0x179e
> -			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
> -			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
> -			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
> -			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
> -			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
> +			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
> +			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
> +			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
> +			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
> +			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
> +			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
>  			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
>  		>;
>  	};
>
> -	pinctrl_usdhc2_100mhz: usdhc2grp {
> +	/* need to config the SION for data and cmd pad, refer to ERR052021 */
> +	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
>  		fsl,pins = <
> -			MX93_PAD_SD2_CLK__USDHC2_CLK            0x179e
> -			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
> -			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x138e
> -			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x138e
> -			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
> -			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
> -			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
> +			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
> +			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
> +			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
> +			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
> +			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
> +			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
> +			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
>  		>;
>  	};
>
> -	pinctrl_usdhc2_200mhz: usdhc2grp {
> +	/* need to config the SION for data and cmd pad, refer to ERR052021 */
> +	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
>  		fsl,pins = <
> -			MX93_PAD_SD2_CLK__USDHC2_CLK            0x178e
> -			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
> -			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x139e
> -			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x139e
> -			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
> -			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
> -			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
> +			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
> +			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
> +			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
> +			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
> +			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
> +			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
> +			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
>  		>;
>  	};
>  };
> --
> 2.34.1
>