[PATCH v6 1/3] dt-bindings: pinctrl: mediatek: Add support for mt8196

[Cathy Xu (许华婷)]

On Thu, 2025-04-10 at 09:49 +0200, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> Il 01/04/25 07:48, Cathy Xu ha scritto:
> > Add the new binding document for pinctrl on MediaTek mt8196.
> > 
> > Signed-off-by: Guodong Liu <guodong.liu at mediatek.com>
> > Signed-off-by: Cathy Xu <ot_cathy.xu at mediatek.com>
> > ---
> >   .../pinctrl/mediatek,mt8196-pinctrl.yaml      | 220
> > ++++++++++++++++++
> >   1 file changed, 220 insertions(+)
> >   create mode 100644
> > Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-
> > pinctrl.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-
> > pinctrl.yaml
> > b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-
> > pinctrl.yaml
> > new file mode 100644
> > index 000000000000..cef7e0321722
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8196-
> > pinctrl.yaml
> > @@ -0,0 +1,220 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > https://urldefense.com/v3/__http://devicetree.org/schemas/pinctrl/mediatek,mt8196-pinctrl.yaml*__;Iw!!CTRNKA9wMg0ARbw!n7xiWfhnU-OH1Yh9pUt3_UbyNsRTGOtkxND03uTyTcqSwSTUtsY1Glo6TvEMc9XX2_oGqyzYGV3uV6OE4aed8YdtXQZkQj7zdQ$
> > +$schema: 
> > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!n7xiWfhnU-OH1Yh9pUt3_UbyNsRTGOtkxND03uTyTcqSwSTUtsY1Glo6TvEMc9XX2_oGqyzYGV3uV6OE4aed8YdtXQZR68c0YA$
> > +
> > +title: MediaTek MT8196 Pin Controller
> > +
> > +maintainers:
> > +  - Lei Xue <lei.xue at mediatek.com>
> > +  - Cathy Xu <ot_cathy.xu at mediatek.com>
> > +
> > +description:
> > +  The MediaTek's MT8196 Pin controller is used to control SoC
> > pins.
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,mt8196-pinctrl
> > +
> > +  reg:
> > +    items:
> > +      - description: gpio base
> > +      - description: rt group IO
> > +      - description: rm1 group IO
> > +      - description: rm2 group IO
> > +      - description: rb group IO
> > +      - description: bm1 group IO
> > +      - description: bm2 group IO
> > +      - description: bm3 group IO
> > +      - description: lt group IO
> > +      - description: lm1 group IO
> > +      - description: lm2 group IO
> > +      - description: lb1 group IO
> > +      - description: lb2 group IO
> > +      - description: tm1 group IO
> > +      - description: tm2 group IO
> > +      - description: tm3 group IO
> > +
> > +  reg-names:
> > +    items:
> > +      - const: base
> > +      - const: rt
> > +      - const: rm1
> > +      - const: rm2
> > +      - const: rb
> > +      - const: bm1
> > +      - const: bm2
> > +      - const: bm3
> > +      - const: lt
> > +      - const: lm1
> > +      - const: lm2
> > +      - const: lb1
> > +      - const: lb2
> > +      - const: tm1
> > +      - const: tm2
> > +      - const: tm3
> 
> Why is there no EINT iospace?

  Thank you for your review. It will be added in next version.

> 
> Regards,
> Angelo
> 
>