[PATCH v1] ARM: dts: imx6q-apalis: remove pcie-switch node

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.

Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
index e1077e2da5f4..1f2200f50059 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
@@ -36,15 +36,6 @@ &can2 {
 	status = "okay";
 };
 
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	/* PCIe Switch */
-	pcie-switch at 58 {
-		compatible = "plx,pex8605";
-		reg = <0x58>;
-	};
-};
-
 &pcie {
 	vpcie-supply = <&reg_pcie_switch>;
 	status = "okay";
-- 
2.39.5