[PATCH v4 2/3] arm64: dts: ti: k3-am62l: add initial infrastructure
krzk at kernel.org
krzk at kernel.org
Wed Apr 9 00:17:01 PDT 2025
On Mon, Apr 07, 2025 at 10:34:39AM GMT, Bryan Brattlof wrote:
> From: Vignesh Raghavendra <vigneshr at ti.com>
>
> Add the initial infrastructure needed for the AM62L. ALl of which can be
> found in the Technical Reference Manual (TRM) located here:
>
> https://www.ti.com/lit/pdf/sprujb4
>
> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
> Signed-off-by: Bryan Brattlof <bb at ti.com>
> ---
> Changes in v3:
> - Added more nodes now that the SCMI interface is ready
>
> Changes in v1:
> - switched to non-direct links to TRM updates are automatic
> - fixed white space indent issues with a few nodes
> - separated out device tree bindings
> ---
> arch/arm64/boot/dts/ti/Makefile | 3 +
> arch/arm64/boot/dts/ti/k3-am62l-main.dtsi | 672 +++++++++++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am62l-thermal.dtsi | 19 +
> arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi | 144 ++++++
> arch/arm64/boot/dts/ti/k3-am62l.dtsi | 121 +++++
> arch/arm64/boot/dts/ti/k3-am62l3.dtsi | 67 +++
> arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 +
> 7 files changed, 1028 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 03d4cecfc001c..93df47282add3 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -32,6 +32,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo
> dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb
>
> +# Boards with AM62Lx SoCs
> +dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb
> +
> # Boards with AM62Px SoC
> dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
> new file mode 100644
> index 0000000000000..697181c2e7f51
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
> @@ -0,0 +1,672 @@
> +// SPDX-License-Identifier: GPL-2.0-only or MIT
> +/*
> + * Device Tree file for the AM62L main domain peripherals
> + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
> + *
> + * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
> + */
> +
> +&cbass_main {
> + gic500: interrupt-controller at 1800000 {
> + compatible = "arm,gic-v3";
> + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
> + <0x00 0x01840000 0x00 0xc0000>, /* GICR */
> + <0x01 0x00000000 0x00 0x2000>, /* GICC */
> + <0x01 0x00010000 0x00 0x1000>, /* GICH */
> + <0x01 0x00020000 0x00 0x2000>; /* GICV */
> + ranges;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + /*
> + * vcpumntirq:
> + * virtual CPU interface maintenance interrupt
> + */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> + gic_its: msi-controller at 1820000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0x00 0x01820000 0x00 0x10000>;
> + socionext,synquacer-pre-its = <0x1000000 0x400000>;
> + msi-controller;
> + #msi-cells = <1>;
> + };
> + };
> +
> + gpio0: gpio at 600000 {
> + compatible = "ti,am64-gpio", "ti,keystone-gpio";
> + reg = <0x00 0x00600000 0x00 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gic500>;
> + interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 267 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&scmi_pds 34>;
> + clocks = <&scmi_clk 140>;
> + clock-names = "gpio";
> + ti,ngpio = <126>;
> + ti,davinci-gpio-unbanked = <0>;
> + status = "disabled";
> + };
> +
> + gpio2: gpio at 610000 {
> + compatible = "ti,am64-gpio", "ti,keystone-gpio";
64 or 62?
> + reg = <0x00 0x00610000 0x00 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gic500>;
> + interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 281 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&scmi_pds 35>;
> + clocks = <&scmi_clk 141>;
> + clock-names = "gpio";
> + ti,ngpio = <79>;
> + ti,davinci-gpio-unbanked = <0>;
> + status = "disabled";
> + };
> +
> + timer0: timer at 2400000 {
> + compatible = "ti,am654-timer";
64? 654? 62? You need to use proper compatibles matching the hardware
(see writing bindings).
> + reg = <0x00 0x2400000 0x00 0x400>;
> + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk 47>;
> + clock-names = "fck";
> + power-domains = <&scmi_pds 15>;
> + ti,timer-pwm;
> + };
> +
...
> + chipid: chipid at 14 {
> + compatible = "ti,am654-chipid";
> + reg = <0x14 0x4>;
> + bootph-all;
> + };
> +
> + usb0_phy_ctrl: syscon at 45000 {
> + compatible = "ti,am62-usb-phy-ctrl", "syscon";
> + reg = <0x45000 0x4>;
> + bootph-all;
> + };
> +
> + usb1_phy_ctrl: syscon at 45004 {
> + compatible = "ti,am62-usb-phy-ctrl", "syscon";
> + reg = <0x45004 0x4>;
No, you do not get syscon per register. The entire point of syscon is to
collect ALL registers. Your device is the syscon, not a register.
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list