[PATCH v3 7/7] drm/rockchip: inno-hdmi: Convert to drm bridge

[Andy Yan]

Hi Alex，

At 2025-04-03 01:24:22, "Alex Bee" <knaerzche at gmail.com> wrote:
>
>Hi Andy,
>
>> From: Andy Yan <andy.yan at rock-chips.com>
>> 
>> Convert it to drm bridge driver, it will be convenient for us to
>> migrate the connector part to the display driver later.
>> 
>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>> 
>> ---
>> 
>> Changes in v3:
>> - First included in v3
>> - Link to V2: https://lore.kernel.org/dri-devel/20250325132944.171111-1-andyshrk@163.com/
>> 
>>   drivers/gpu/drm/bridge/Kconfig                |   7 +
>>   drivers/gpu/drm/bridge/Makefile               |   1 +
>>   .../inno_hdmi.c => bridge/inno-hdmi.c}        | 924 ++++++++++--------
>>   drivers/gpu/drm/rockchip/Kconfig              |   1 +
>>   drivers/gpu/drm/rockchip/Makefile             |   2 +-
>>   drivers/gpu/drm/rockchip/inno_hdmi-rockchip.c | 187 ++++
>>   drivers/gpu/drm/rockchip/inno_hdmi.h          | 349 -------
>>   include/drm/bridge/inno_hdmi.h                |  33 +
>>   8 files changed, 741 insertions(+), 763 deletions(-)
>>   rename drivers/gpu/drm/{rockchip/inno_hdmi.c => bridge/inno-hdmi.c} (52%)
>>   create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi-rockchip.c
>>   delete mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h
>>   create mode 100644 include/drm/bridge/inno_hdmi.h
>>
>
>...
>
>> +#define m_RX_DONE			(1 << 0)
>> +
>> +#define HDMI_CEC_TX_INT			0xda
>> +#define HDMI_CEC_RX_INT			0xdb
>> +#define HDMI_CEC_BUSFREETIME_L		0xdc
>> +#define HDMI_CEC_BUSFREETIME_H		0xdd
>> +#define HDMI_CEC_LOGICADDR		0xde
>> +
>>   struct inno_hdmi_i2c {
>>   	struct i2c_adapter adap;
>>   
>> @@ -68,41 +395,18 @@ struct inno_hdmi_i2c {
>>   
>>   struct inno_hdmi {
>>   	struct device *dev;
>> -
>> +	struct drm_bridge bridge;
>>   	struct clk *pclk;
>>   	struct clk *refclk;
>>   	void __iomem *regs;
>>   	struct regmap *grf;
>>   
>> -	struct drm_connector	connector;
>> -	struct rockchip_encoder	encoder;
>> -
>>   	struct inno_hdmi_i2c *i2c;
>>   	struct i2c_adapter *ddc;
>> -
>> -	const struct inno_hdmi_variant *variant;
>> +	const struct inno_hdmi_plat_data *plat_data;
>> +	unsigned int colorimetry;
>
>thanks a lot for doing the bridge conversion for this driver.
>Please keep the custom connector state which was introduced after Maxim's
>review during the last rework of this [0] driver. The colorimetry is not
>part of the device, but of the connector and thus should not be part of the
>device struct.
>It's, however, likely that the common (hdmi-)connector framework will once
>hold its own colorimetry property and then the custom connector state in
>this driver can go away, but until than we have to keep it here.

After converting to a bridge driver, this driver no longer has a connector. 
In this case, how should I create customized connector states?

>
>Thanks,
>Alex
>
>[0]
>https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ceeb0f0104a62c867656c2730a51df47e7350b8f
>
>
>>   };
>>   
>> -struct inno_hdmi_connector_state {
>> -	struct drm_connector_state	base;
>> -	unsigned int			colorimetry;
>> -};
>> -
>> -static struct inno_hdmi *encoder_to_inno_hdmi(struct drm_encoder *encoder)
>> -{
>> -	struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
>> -
>> -	return container_of(rkencoder, struct inno_hdmi, encoder);
>> -}
>> -
>> -static struct inno_hdmi *connector_to_inno_hdmi(struct drm_connector *connector)
>...