[PATCH net-next 3/5] net: stmmac: intel-plat: remove eee_usecs_rate and hardware write

[Russell King (Oracle)]

Remove the write to GMAC_1US_TIC_COUNTER for two reasons:

1. during initialisation or reinitialisation of the DWMAC core, the
   core is reset, which sets this register back to its default value.
   Writing it prior to stmmac_dvr_probe() has no effect.

2. Since commit 8efbdbfa9938 ("net: stmmac: Initialize
   MAC_ONEUS_TIC_COUNTER register"), GMAC4/5 core code will set
   this register based on the rate of plat->stmmac_clk. This clock
   is fetched by devm_stmmac_probe_config_dt(), and plat->clk_ptp_rate
   will be set to its rate profided a "ptp_ref" clock is not provided.
   In any case, Marek's commit will set the effectual value of this
   register.

Therefore, dwmac-intel-plat.c writing GMAC_1US_TIC_COUNTER serves no
useful purpose and can be removed.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
index 599def7b3a64..4ea7b0a803d7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
@@ -113,16 +113,7 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
 
 	plat_dat->clk_tx_i = dwmac->tx_clk;
 	plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
-
 	plat_dat->bsp_priv = dwmac;
-	plat_dat->eee_usecs_rate = plat_dat->clk_ptp_rate;
-
-	if (plat_dat->eee_usecs_rate > 0) {
-		u32 tx_lpi_usec;
-
-		tx_lpi_usec = (plat_dat->eee_usecs_rate / 1000000) - 1;
-		writel(tx_lpi_usec, stmmac_res.addr + GMAC_1US_TIC_COUNTER);
-	}
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
-- 
2.30.2