[PATCH] ARM: dts: lpc32xx: Add #pwm-cells property to the two SoC PWMs

[Uwe Kleine-König]

If these PWMs are to be used, a #pwm-cells property is necessary. The
right location for that is in the SoC's dtsi file to not make
machine.dts files repeat the value for each usage. Currently the
machines based on nxp/lpc/lpc32xx.dtsi don't make use of the PWMs, so
there are no properties to drop there.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at baylibre.com>
---
Hello,

found while reviewing https://lore.kernel.org/linux-pwm/20250312122750.6391-1-purvayeshi550@gmail.com

Best regards
Uwe

 arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index 974410918f35..4460a1960606 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -481,6 +481,7 @@ pwm1: pwm at 4005c000 {
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
@@ -490,6 +491,7 @@ pwm2: pwm at 4005c004 {
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
-- 
2.47.2