[PATCH v3 9/9] arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX
Andy Yan
andyshrk at 163.com
Wed Apr 2 20:37:37 PDT 2025
From: Andy Yan <andy.yan at rock-chips.com>
The HDMI0(Port next to Headphone Jack) is drived by DP1 on rk3588
via RA620(a dp2hdmi converter).
Add related dt nodes to enable it.
Note: ROCKCHIP_VOP2_EP_DP1 is defined as 11 in dt-binding header,
but it will trigger a dtc warning like "graph node unit address
error, expected "b"" if we use it directly after endpoint, so we
use "b" instead here.
Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
---
Changes in v3:
- Add RA620 into bridge chain.
.../boot/dts/rockchip/rk3588-rock-5-itx.dts | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
index 67b8863292487..bb61633a5b995 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -57,6 +57,29 @@ analog-sound {
"Headphone", "Headphones";
};
+ bridge {
+ compatible = "radxa,ra620";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port at 0 {
+ reg = <0>;
+ hdmi_bridge_in: endpoint {
+ remote-endpoint = <&dp1_out_con>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ hdmi_bridge_out: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
+
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -73,6 +96,17 @@ hdd-led2 {
};
};
+ hdmi0-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_bridge_out>;
+ };
+ };
+ };
+
hdmi1-con {
compatible = "hdmi-connector";
type = "a";
@@ -268,6 +302,24 @@ &cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
+&dp1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp1m0_pins>;
+};
+
+&dp1_in {
+ dp1_in_vp2: endpoint {
+ remote-endpoint = <&vp2_out_dp1>;
+ };
+};
+
+&dp1_out {
+ dp1_out_con: endpoint {
+ remote-endpoint = <&hdmi_bridge_in>;
+ };
+};
+
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
@@ -1262,3 +1314,10 @@ vp1_out_hdmi1: endpoint at ROCKCHIP_VOP2_EP_HDMI1 {
remote-endpoint = <&hdmi1_in_vp1>;
};
};
+
+&vp2 {
+ vp2_out_dp1: endpoint at b {
+ reg = <ROCKCHIP_VOP2_EP_DP1>;
+ remote-endpoint = <&dp1_in_vp2>;
+ };
+};
--
2.43.0
More information about the linux-arm-kernel
mailing list