[PATCH v2 0/6] Enable Mali GPU on MediaTek Genio 700 EVK

[Pablo Sun]

This series is based on linux-next, tag: next-20240927

Enables the GPU on mt8390-genio-700-evk.dts. 
The panfrost driver probed with dmesg:

panfrost 13000000.gpu: clock rate = 390000000
panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x0 status 0x0
panfrost 13000000.gpu: features: 00000000,000019f7, 
  issues: 00000003,80000400
panfrost 13000000.gpu: Features: L2:0x08130206 Shader:0x00000000
  Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
panfrost 13000000.gpu: shader_present=0x10005 l2_present=0x1
[drm] Initialized panfrost 1.2.0 for 13000000.gpu on minor 0

Changes in v2:
- Fixes the "Fixes" tag in patch ("arm64: dts: mediatek: mt8188: 
  Fix wrong clock provider in MFG1 power domain")
- Reuse mtk_mt8186_efuse_pdata
- Remove comma at the end of mainpll_d5_d2
- Add patch ("soc: mediatek: mediatek-regulator-coupler: Support mt8188")
- Couple GPU SRAM voltage to GPU voltage instead of fixed value

Pablo Sun (6):
  arm64: dts: mediatek: mt8188: Fix wrong clock provider in MFG1 power
    domain
  clk: mediatek: clk-mt8188-topckgen: Remove univpll from parents of
    mfg_core_tmp
  nvmem: mtk-efuse: Enable postprocess for mt8188 GPU speed binning
  arm64: dts: mediatek: mt8188: Add efuse for GPU speed binning
  soc: mediatek: mediatek-regulator-coupler: Support mt8188
  arm64: dts: mediatek: mt8390-genio-700-evk: Enable Mali GPU

 arch/arm64/boot/dts/mediatek/mt8188.dtsi      | 11 +++++--
 .../dts/mediatek/mt8390-genio-700-evk.dts     | 31 +++++++++++++++++++
 drivers/clk/mediatek/clk-mt8188-topckgen.c    |  9 ++++--
 drivers/nvmem/mtk-efuse.c                     |  1 +
 drivers/soc/mediatek/mtk-regulator-coupler.c  |  1 +
 5 files changed, 48 insertions(+), 5 deletions(-)

-- 
2.45.2