[PATCH v2 00/13] Tool and hwmon PMUs

[Ian Rogers]

On Fri, Sep 13, 2024 at 7:34 AM Ian Rogers <irogers at google.com> wrote:
>
> On Thu, Sep 12, 2024 at 3:50 PM Namhyung Kim <namhyung at kernel.org> wrote:
> >
> > On Thu, Sep 12, 2024 at 12:03:27PM -0700, Ian Rogers wrote:
> > > Rather than have fake and tool PMUs being special flags in an evsel,
> > > create special PMUs. This allows, for example, duration_time to also
> > > be tool/duration_time/. Once adding events to the tools PMU is just
> > > adding to an array, add events for nearly all the expr literals like
> > > num_cpus_online. Rather than create custom logic for finding and
> > > describing the tool events use json and add a notion of common json
> > > for the tool events.
> > >
> > > Following the convention of the tool PMU, create a hwmon PMU that
> > > exposes hwmon data for reading. For example, the following shows
> > > reading the CPU temperature and 2 fan speeds alongside the uncore
> > > frequency:
> > > ```
> > > $ perf stat -e temp_cpu,fan1,hwmon_thinkpad/fan2/,tool/num_cpus_online/ -M UNCORE_FREQ -I 1000
> > >      1.001153138              52.00 'C   temp_cpu
> > >      1.001153138              2,588 rpm  fan1
> > >      1.001153138              2,482 rpm  hwmon_thinkpad/fan2/
> > >      1.001153138                  8      tool/num_cpus_online/
> > >      1.001153138      1,077,101,397      UNC_CLOCK.SOCKET                 #     1.08 UNCORE_FREQ
> > >      1.001153138      1,012,773,595      duration_time
> > > ...
> > > ```
> > >
> > > Additional data on the hwmon events is in perf list:
> > > ```
> > > $ perf list
> > > ...
> > > hwmon:
> > > ...
> > >   temp_core_0 OR temp2
> > >        [Temperature in unit coretemp named Core 0. crit=100'C,max=100'C crit_alarm=0'C. Unit:
> > >         hwmon_coretemp]
> > > ...
> > > ```
> > >
> > > v2: Address Namhyung's review feedback. Rebase dropping 4 patches
> > >     applied by Arnaldo, fix build breakage reported by Arnaldo.
> > >
> > > Ian Rogers (13):
> > >   perf pmu: Simplify an asprintf error message
> > >   perf pmu: Allow hardcoded terms to be applied to attributes
> > >   perf parse-events: Expose/rename config_term_name
> > >   perf tool_pmu: Factor tool events into their own PMU
> > >   perf tool_pmu: Rename enum perf_tool_event to tool_pmu_event
> > >   perf tool_pmu: Rename perf_tool_event__* to tool_pmu__*
> > >   perf tool_pmu: Move expr literals to tool_pmu
> > >   perf jevents: Add tool event json under a common architecture
> > >   perf tool_pmu: Switch to standard pmu functions and json descriptions
> > >   perf tests: Add tool PMU test
> > >   perf hwmon_pmu: Add a tool PMU exposing events from hwmon in sysfs
> > >   perf test: Add hwmon "PMU" test
> > >   perf docs: Document tool and hwmon events
> >
> > For patch 1-10,
> >
> > Acked-by: Namhyung Kim <namhyung at kernel.org>

I thought the plan was for 1 to 10 to be in v6.12 and the remaining 3
to be in perf-tools-next/v6.13. I'm not seeing any of the series in
perf-tools so should everything be going in perf-tools-next?

Thanks,
Ian