[PATCH 2/2] arm64: dts: renesas: ulcb: Add SD/OE pin properties

[Sean Anderson]

Add SD/OE pin properties to the devicetree so that Linux can configure
the pin without relying on the OTP. This configuration is based on
inspection of the schematic (which shows the SD/OE pin permanently tied
high).

Signed-off-by: Sean Anderson <sean.anderson at linux.dev>
---

 arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index a2f66f916048..2a2cd788ffec 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -234,6 +234,8 @@ versaclock5: clock-generator at 6a {
 		#clock-cells = <1>;
 		clocks = <&x23_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <1>;
 	};
 };
 
-- 
2.35.1.1320.gc452695387.dirty