[PATCH v4 0/5] Add mfd, pinctrl and pwm support to EN7581 SoC
Christian Marangi
ansuelsmth at gmail.com
Wed Sep 25 02:51:10 PDT 2024
On Wed, Sep 25, 2024 at 10:47:38AM +0100, Lee Jones wrote:
> On Mon, 23 Sep 2024, Christian Marangi wrote:
>
> > On Wed, Sep 11, 2024 at 09:50:00PM +0200, Lorenzo Bianconi wrote:
> > > Introduce airoha-mfd driver in order to load pinctrl and pwm drivers for
> > > EN7581 SoC. airoha-mfd is needed since both pinctrl and pwm drivers
> > > needs to access the same memory block (gpio memory region) to configure
> > > {gio,irq}_chip and pwm functionalities respectively, so model them as
> > > childs of a parent mfd driver.
> > > Current EN7581 pinctrl driver supports the following functionalities:
> > > - pin multiplexing via chip_scu syscon
> > > - pin pull-up, pull-down, open-drain, current strength,
> > > {input,output}_enable, output_{low,high} via chip_scu syscon
> > > - gpio controller
> > > - irq controller
> > >
> > > ---
> > > Changes in v4:
> > > - add 'Limitation' description in pwm driver
> > > - fix comments in pwm driver
> > > - rely on mfd->base __iomem pointer in pwm driver, modify register
> > > offsets according to it and get rid of sgpio_cfg, flash_cfg and
> > > cycle_cfg pointers
> > > - simplify register utility routines in pwm driver
> > > - use 'generator' instead of 'waveform' suffix for pwm routines
> > > - fix possible overflow calculating duty cycle in pwm driver
> > > - do not modify pwm state in free callback in pwm driver
> > > - cap the maximum period in pwm driver
> > > - do not allow inverse polarity in pwm driver
> > > - do not set of_xlate callback in the pwm driver and allow the stack to
> > > do it
> > > - fix MAINTAINERS file for airoha pinctrl driver
> > > - fix undefined reference to __ffsdi2 in pinctrl driver
> > > - simplify airoha,en7581-gpio-sysctl.yam binding
> > > - Link to v3: https://lore.kernel.org/r/20240831-en7581-pinctrl-v3-0-98eebfb4da66@kernel.org
> > >
> > > Changes in v3:
> > > - introduce airoha-mfd driver
> > > - add pwm driver to the same series
> > > - model pinctrl and pwm drivers as childs of a parent mfd driver.
> > > - access chip-scu memory region in pinctrl driver via syscon
> > > - introduce a single airoha,en7581-gpio-sysctl.yaml binding and get rid
> > > of dedicated bindings for pinctrl and pwm
> > > - add airoha,en7581-chip-scu.yaml binding do the series
> > > - Link to v2: https://lore.kernel.org/r/20240822-en7581-pinctrl-v2-0-ba1559173a7f@kernel.org
> > >
> > > Changes in v2:
> > > - Fix compilation errors
> > > - Collapse some register mappings for gpio and irq controllers
> > > - update dt-bindings according to new register mapping
> > > - fix some dt-bindings errors
> > > - Link to v1: https://lore.kernel.org/all/cover.1723392444.git.lorenzo@kernel.org/
> > >
> > > ---
> > > Benjamin Larsson (1):
> > > pwm: airoha: Add support for EN7581 SoC
> > >
> > > Christian Marangi (2):
> > > dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller
> > > mfd: airoha: Add support for Airoha EN7581 MFD
> > >
> > > Lorenzo Bianconi (2):
> > > dt-bindings: arm: airoha: Add the chip-scu node for EN7581 SoC
> > > pinctrl: airoha: Add support for EN7581 SoC
> > >
> > > .../bindings/arm/airoha,en7581-chip-scu.yaml | 42 +
> > > .../bindings/mfd/airoha,en7581-gpio-sysctl.yaml | 433 +++
> > > MAINTAINERS | 7 +
> > > drivers/mfd/Kconfig | 8 +
> > > drivers/mfd/Makefile | 2 +
> > > drivers/mfd/airoha-en7581-gpio-mfd.c | 72 +
> > > drivers/pinctrl/mediatek/Kconfig | 16 +-
> > > drivers/pinctrl/mediatek/Makefile | 1 +
> > > drivers/pinctrl/mediatek/pinctrl-airoha.c | 2964 ++++++++++++++++++++
> > > drivers/pwm/Kconfig | 10 +
> > > drivers/pwm/Makefile | 1 +
> > > drivers/pwm/pwm-airoha.c | 414 +++
> > > include/linux/mfd/airoha-en7581-mfd.h | 9 +
> > > 13 files changed, 3978 insertions(+), 1 deletion(-)
> > > ---
> > > base-commit: 264c13114bd71ddfd7b25c7b94f6cda4587eca25
> > > change-id: 20240818-en7581-pinctrl-1bf120154be0
> > > prerequisite-change-id: 20240705-for-6-11-bpf-a349efc08df8:v2
> > >
> > >
> >
> > Hi,
> >
> > any news with this? Rob reviewed the DT schemas and he is ok with them.
> >
> > Any other comments for the MFD driver and/or the pinctrl or PWM driver?
>
> Note that the merge-window is still open. Some maintainers, myself
> included, use this lull to prioritise other things. This set is on my
> list and will be dealt with shortly.
>
Wasn't aware the merge window was still open and sorry for the noise.
Thanks for the feedback!
--
Ansuel
More information about the linux-arm-kernel
mailing list