[PATCH 1/2] spi: s3c64xx: fix timeout counters in flush_fifo

[Ben Dooks]

In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.

Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
---
 drivers/spi/spi-s3c64xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 833c58c88e40..6ab416a33966 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -245,7 +245,7 @@ static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 	loops = msecs_to_loops(1);
 	do {
 		val = readl(regs + S3C64XX_SPI_STATUS);
-	} while (TX_FIFO_LVL(val, sdd) && loops--);
+	} while (TX_FIFO_LVL(val, sdd) && --loops);
 
 	if (loops == 0)
 		dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
@@ -258,7 +258,7 @@ static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 			readl(regs + S3C64XX_SPI_RX_DATA);
 		else
 			break;
-	} while (loops--);
+	} while (--loops);
 
 	if (loops == 0)
 		dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
-- 
2.37.2.352.g3c44437643