[PATCH 4/4] arm64: dts: imx8mp-iota2: Enable the USB Type-C port

[Michal Vokáč]

On 18. 09. 24 15:17, Krzysztof Kozlowski wrote:
> On 17/09/2024 17:10, Michal Vokáč wrote:
>> From: Petr Benes <petr.benes at ysoft.com>
>>
>> Enable the USB Type-C port with the Diodes PI5USB30213A port controller.
>> The port supports dual role data but can operate only in source power role
>> and PD is not supported.
>>
>> Signed-off-by: Petr Benes <petr.benes at ysoft.com>
>> Signed-off-by: Michal Vokáč <michal.vokac at ysoft.com>
>> ---
>>   .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 96 +++++++++++++++++++
>>   1 file changed, 96 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
>> index 21d0899cabd5..b15d211e8667 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
>> @@ -38,6 +38,17 @@ memory at 40000000 {
>>   		      <0x1 0x00000000 0 0x80000000>;
>>   	};
>>   
>> +	reg_typec: regulator-typec {
>> +		compatible = "regulator-fixed";
>> +		enable-active-high;
>> +		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_usbc_vbus>;
>> +		regulator-max-microvolt = <5000000>;
>> +		regulator-min-microvolt = <5000000>;
>> +		regulator-name = "typec";
>> +	};
>> +
>>   	reg_usb_host: regulator-usb-host {
>>   		compatible = "regulator-fixed";
>>   		enable-active-high;
>> @@ -218,6 +229,47 @@ &i2c2 {
>>   	pinctrl-0 = <&pinctrl_i2c2>;
>>   	status = "okay";
>>   
>> +	tcpc at d {
> 
> typec at d
> 
>> +		compatible = "diodes,pi5usb30213a";
>> +		reg = <0xd>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_typec>;
>> +		interrupts-extended = <&gpio1 5 IRQ_TYPE_LEVEL_LOW>;
>> +		status = "okay";
> 
> Drop

OK. I will address both comments.

Thank you for the review,
Michal