[PATCH v3 1/4] dt-bindings: mfd: aspeed: support for AST2700

[Ryan Chen]

> Subject: Re: [PATCH v3 1/4] dt-bindings: mfd: aspeed: support for AST2700
> 
> On 16/09/2024 11:10, Ryan Chen wrote:
> > Add compatible support for AST2700 clk, reset, pinctrl, silicon-id for AST2700
> scu.
> 
> Please wrap commit message according to Linux coding style / submission
> process (neither too early nor over the limit):
> https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/sub
> mitting-patches.rst#L597

Will update it.
> 
> >
> > Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> > ---
> >  .../devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml | 13
> > +++++++++++--
> >  1 file changed, 11 insertions(+), 2 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > index 86ee69c0f45b..127a357051cd 100644
> > --- a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> > @@ -9,6 +9,8 @@ title: Aspeed System Control Unit
> >  description:
> >    The Aspeed System Control Unit manages the global behaviour of the
> SoC,
> >    configuring elements such as clocks, pinmux, and reset.
> > +  In AST2700 SOC which has two soc connection, each soc have its own
> > + scu  register control, ast2700-scu0 for soc0, ast2700-scu1 for soc1.
> >
> >  maintainers:
> >    - Joel Stanley <joel at jms.id.au>
> > @@ -21,6 +23,8 @@ properties:
> >            - aspeed,ast2400-scu
> >            - aspeed,ast2500-scu
> >            - aspeed,ast2600-scu
> > +          - aspeed,ast2700-scu0
> > +          - aspeed,ast2700-scu1
> >        - const: syscon
> >        - const: simple-mfd
> >
> > @@ -30,10 +34,12 @@ properties:
> >    ranges: true
> >
> >    '#address-cells':
> > -    const: 1
> > +    minimum: 1
> > +    maximum: 2
> >
> >    '#size-cells':
> > -    const: 1
> > +    minimum: 1
> > +    maximum: 2
> 
> Why do the children have 64 bit addressing?

AST2700 is 64bit address, so it also.
It is children example for pinctrl.

                syscon1: syscon at 14c02000 {
                        compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
                        reg = <0x0 0x14c02000 0x0 0x1000>;
                        ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
                        #address-cells = <2>;
                        #size-cells = <2>;
                        #clock-cells = <1>;
                        #reset-cells = <1>;

                        pinctrl1: pinctrl at 400 {
                                compatible = "aspeed,ast2700-soc1-pinctrl";
                                reg = <0x0 0x400 0x0 0x100>;
                        };
                };
> 
> >
> >    '#clock-cells':
> >      const: 1
> > @@ -56,6 +62,8 @@ patternProperties:
> >              - aspeed,ast2400-pinctrl
> >              - aspeed,ast2500-pinctrl
> >              - aspeed,ast2600-pinctrl
> > +            - aspeed,ast2700-soc0-pinctrl
> > +            - aspeed,ast2700-soc1-pinctrl
> 
> Are these devices different?
> 
> Where is this binding documented (fully)? Provide link to lore patch in the
> changelog.

I will remove it in next submit. 
It will add in another pinctrl submit patch.
> 
> >
> >      required:
> >        - compatible
> > @@ -76,6 +84,7 @@ patternProperties:
> >                - aspeed,ast2400-silicon-id
> >                - aspeed,ast2500-silicon-id
> >                - aspeed,ast2600-silicon-id
> > +              - aspeed,ast2700-silicon-id
> 
> This one is fine.
Thanks.
> 
> >            - const: aspeed,silicon-id
> >
> >        reg:
> 
> Best regards,
> Krzysztof