[PATCH 2/4] arm64: dts: imx: Add imx8mp-iota2-lumpy board

[Michal Vokáč]

On 17. 09. 24 21:07, Frank Li wrote:
> On Tue, Sep 17, 2024 at 05:09:59PM +0200, Michal Vokáč wrote:
>> The IOTA2 Lumpy board is based on the i.MX8MPlus EVK.
>>
>> Basic features are:
>> - 4GB LPDDR4
>> - 64GB eMMC
>> - 2x 1GB Ethernet
>> - USB 3.0 Type-C dual role port, without power delivery
>> - USB 3.0 Type-A host port
>> - RGB LED - PWM driven
>> - speaker - PWM driven
>> - RTC with super capacitor backup
>>
>> Signed-off-by: Michal Vokáč <michal.vokac at ysoft.com>
>> ---
> 
> Suggest you try tools https://github.com/lznuaa/dt-format
> 
> Any issue let me know.

Hi Frank,
I was aware of some non-written rules how the nodes
and properties should be sorted but this will definitely help!

I will try it for v2.
Thanks a lot.

>>   arch/arm64/boot/dts/freescale/Makefile        |   1 +
>>   .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 425 ++++++++++++++++++
>>   2 files changed, 426 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
>>
>> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
>> index f04c22b7de72..421c36c5ae68 100644
>> --- a/arch/arm64/boot/dts/freescale/Makefile
>> +++ b/arch/arm64/boot/dts/freescale/Makefile
>> @@ -171,6 +171,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
>>   dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
>>   dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
>>   dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
>> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
>>   dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
>>   dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
>>   dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
>> new file mode 100644
...
[snip]
...
>> +
>> +&pwm4 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pwm4>;
>> +	pwm-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;

^^^ The pwm-gpios property should not be here. I will remove it in v2.

>> +	status = "okay";
>> +};