[PATCH 1/2] arm64: dts: ti: am62-phycore-som: Increase cpu frequency to 1.4 GHz

[Garrett Giordano]

The am625 is capable of running at 1.4 GHz when VDD_CORE is increased
from 0.75V to 0.85V. Here we add a 1.4 GHz node to the a53_opp_table and
increase the VDD_CORE voltage accordingly.

Signed-off-by: Garrett Giordano <ggiordano at phytec.com>
---
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index ac8959f3d953..8acbd4facf37 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -205,6 +205,13 @@ AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */
 	};
 };
 
+&a53_opp_table {
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+	};
+};
+
 &mcu_m4fss {
 	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
 	memory-region = <&mcu_m4fss_dma_memory_region>,
@@ -265,8 +272,8 @@ pmic at 30 {
 		regulators {
 			vdd_core: buck1 {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
-- 
2.25.1