[PATCH v4 3/3] arm64: dts: meson: a1: add definitions for meson PWM

[George Stark]

Hello Neil

Please take a look at this patch. Appropriate bindings were merged recently.


On 7/11/24 02:41, George Stark wrote:
> The chip has 3 dual-channel PWM modules PWM_AB, PWM_CD, PWM_EF those
> can be connected to various digital I/O pins.
> 
> Each of 6 PWM is driven by individually selected clock parent and
> 8-bit divider. The PWM signal is generated using two 16-bit counters.
> 
> Signed-off-by: George Stark <gnstark at salutedevices.com>
> Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
> ---
>   arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 215 ++++++++++++++++++++++
>   1 file changed, 215 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> index 85e56c021e99..0dc39fb8f59d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> @@ -307,6 +307,188 @@ mux {
>   					};
>   				};
>   
> +				pwm_a_pins1: pwm-a-pins1 {
> +					mux {
> +						groups = "pwm_a_x6";
> +						function = "pwm_a";
> +					};
> +				};
> +
> +				pwm_a_pins2: pwm-a-pins2 {
> +					mux {
> +						groups = "pwm_a_x7";
> +						function = "pwm_a";
> +					};
> +				};
> +
> +				pwm_a_pins3: pwm-a-pins3 {
> +					mux {
> +						groups = "pwm_a_f10";
> +						function = "pwm_a";
> +					};
> +				};
> +
> +				pwm_a_pins4: pwm-a-pins4 {
> +					mux {
> +						groups = "pwm_a_f6";
> +						function = "pwm_a";
> +					};
> +				};
> +
> +				pwm_a_pins5: pwm-a-pins5 {
> +					mux {
> +						groups = "pwm_a_a";
> +						function = "pwm_a";
> +					};
> +				};
> +
> +				pwm_b_pins1: pwm-b-pins1 {
> +					mux {
> +						groups = "pwm_b_x";
> +						function = "pwm_b";
> +					};
> +				};
> +
> +				pwm_b_pins2: pwm-b-pins2 {
> +					mux {
> +						groups = "pwm_b_f";
> +						function = "pwm_b";
> +					};
> +				};
> +
> +				pwm_b_pins3: pwm-b-pins3 {
> +					mux {
> +						groups = "pwm_b_a";
> +						function = "pwm_b";
> +					};
> +				};
> +
> +				pwm_c_pins1: pwm-c-pins1 {
> +					mux {
> +						groups = "pwm_c_x";
> +						function = "pwm_c";
> +					};
> +				};
> +
> +				pwm_c_pins2: pwm-c-pins2 {
> +					mux {
> +						groups = "pwm_c_f3";
> +						function = "pwm_c";
> +					};
> +				};
> +
> +				pwm_c_pins3: pwm-c-pins3 {
> +					mux {
> +						groups = "pwm_c_f8";
> +						function = "pwm_c";
> +					};
> +				};
> +
> +				pwm_c_pins4: pwm-c-pins4 {
> +					mux {
> +						groups = "pwm_c_a";
> +						function = "pwm_c";
> +					};
> +				};
> +
> +				pwm_d_pins1: pwm-d-pins1 {
> +					mux {
> +						groups = "pwm_d_x15";
> +						function = "pwm_d";
> +					};
> +				};
> +
> +				pwm_d_pins2: pwm-d-pins2 {
> +					mux {
> +						groups = "pwm_d_x13";
> +						function = "pwm_d";
> +					};
> +				};
> +
> +				pwm_d_pins3: pwm-d-pins3 {
> +					mux {
> +						groups = "pwm_d_x10";
> +						function = "pwm_d";
> +					};
> +				};
> +
> +				pwm_d_pins4: pwm-d-pins4 {
> +					mux {
> +						groups = "pwm_d_f";
> +						function = "pwm_d";
> +					};
> +				};
> +
> +				pwm_e_pins1: pwm-e-pins1 {
> +					mux {
> +						groups = "pwm_e_p";
> +						function = "pwm_e";
> +					};
> +				};
> +
> +				pwm_e_pins2: pwm-e-pins2 {
> +					mux {
> +						groups = "pwm_e_x16";
> +						function = "pwm_e";
> +					};
> +				};
> +
> +				pwm_e_pins3: pwm-e-pins3 {
> +					mux {
> +						groups = "pwm_e_x14";
> +						function = "pwm_e";
> +					};
> +				};
> +
> +				pwm_e_pins4: pwm-e-pins4 {
> +					mux {
> +						groups = "pwm_e_x2";
> +						function = "pwm_e";
> +					};
> +				};
> +
> +				pwm_e_pins5: pwm-e-pins5 {
> +					mux {
> +						groups = "pwm_e_f";
> +						function = "pwm_e";
> +					};
> +				};
> +
> +				pwm_e_pins6: pwm-e-pins6 {
> +					mux {
> +						groups = "pwm_e_a";
> +						function = "pwm_e";
> +					};
> +				};
> +
> +				pwm_f_pins1: pwm-f-pins1 {
> +					mux {
> +						groups = "pwm_f_b";
> +						function = "pwm_f";
> +					};
> +				};
> +
> +				pwm_f_pins2: pwm-f-pins2 {
> +					mux {
> +						groups = "pwm_f_x";
> +						function = "pwm_f";
> +					};
> +				};
> +
> +				pwm_f_pins3: pwm-f-pins3 {
> +					mux {
> +						groups = "pwm_f_f4";
> +						function = "pwm_f";
> +					};
> +				};
> +
> +				pwm_f_pins4: pwm-f-pins4 {
> +					mux {
> +						groups = "pwm_f_f12";
> +						function = "pwm_f";
> +					};
> +				};
> +
>   				sdio_pins: sdio {
>   					mux0 {
>   						groups = "sdcard_d0_x",
> @@ -648,6 +830,28 @@ uart_AO_B: serial at 2000 {
>   				status = "disabled";
>   			};
>   
> +			pwm_ab: pwm at 2400 {
> +				compatible = "amlogic,meson-a1-pwm",
> +					     "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x2400 0x0 0x24>;
> +				#pwm-cells = <3>;
> +				clocks = <&clkc_periphs CLKID_PWM_A>,
> +					 <&clkc_periphs CLKID_PWM_B>;
> +				power-domains = <&pwrc PWRC_I2C_ID>;
> +				status = "disabled";
> +			};
> +
> +			pwm_cd: pwm at 2800 {
> +				compatible = "amlogic,meson-a1-pwm",
> +					     "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x2800 0x0 0x24>;
> +				#pwm-cells = <3>;
> +				clocks = <&clkc_periphs CLKID_PWM_C>,
> +					 <&clkc_periphs CLKID_PWM_D>;
> +				power-domains = <&pwrc PWRC_I2C_ID>;
> +				status = "disabled";
> +			};
> +
>   			saradc: adc at 2c00 {
>   				compatible = "amlogic,meson-g12a-saradc",
>   					"amlogic,meson-saradc";
> @@ -732,6 +936,17 @@ sec_AO: ao-secure at 5a20 {
>   				amlogic,has-chip-id;
>   			};
>   
> +			pwm_ef: pwm at 5400 {
> +				compatible = "amlogic,meson-a1-pwm",
> +					     "amlogic,meson-s4-pwm";
> +				reg = <0x0 0x5400 0x0 0x24>;
> +				#pwm-cells = <3>;
> +				clocks = <&clkc_periphs CLKID_PWM_E>,
> +					 <&clkc_periphs CLKID_PWM_F>;
> +				power-domains = <&pwrc PWRC_I2C_ID>;
> +				status = "disabled";
> +			};
> +
>   			clkc_pll: pll-clock-controller at 7c80 {
>   				compatible = "amlogic,a1-pll-clkc";
>   				reg = <0 0x7c80 0 0x18c>;

-- 
Best regards
George