[PATCH v5 4/9] reset: amlogic: add driver parameters

[Neil Armstrong]

On 10/09/2024 18:32, Jerome Brunet wrote:
> To allow using the same driver for the main reset controller and the
> auxiliary ones embedded in the clock controllers, allow to customise
> the reset offset, same as the level offset. Also add an option to make
> the level reset active low or high.
> 
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
>   drivers/reset/reset-meson.c | 14 +++++++++++++-
>   1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
> index 50bd2241ef2f..6a90613c8095 100644
> --- a/drivers/reset/reset-meson.c
> +++ b/drivers/reset/reset-meson.c
> @@ -18,7 +18,9 @@
>   
>   struct meson_reset_param {
>   	unsigned int reg_count;
> +	unsigned int reset_offset;
>   	unsigned int level_offset;
> +	bool level_low_reset;
>   };
>   
>   struct meson_reset {
> @@ -46,6 +48,7 @@ static int meson_reset_reset(struct reset_controller_dev *rcdev,
>   	unsigned int offset, bit;
>   
>   	meson_reset_offset_and_bit(data, id, &offset, &bit);
> +	offset += data->param->reset_offset;
>   
>   	return regmap_write(data->map, offset, BIT(bit));
>   }
> @@ -59,9 +62,10 @@ static int meson_reset_level(struct reset_controller_dev *rcdev,
>   
>   	meson_reset_offset_and_bit(data, id, &offset, &bit);
>   	offset += data->param->level_offset;
> +	assert ^= data->param->level_low_reset;
>   
>   	return regmap_update_bits(data->map, offset,
> -				  BIT(bit), assert ? 0 : BIT(bit));
> +				  BIT(bit), assert ? BIT(bit) : 0);
>   }
>   
>   static int meson_reset_assert(struct reset_controller_dev *rcdev,
> @@ -84,22 +88,30 @@ static const struct reset_control_ops meson_reset_ops = {
>   
>   static const struct meson_reset_param meson8b_param = {
>   	.reg_count	= 8,
> +	.reset_offset	= 0x0,
>   	.level_offset	= 0x7c,
> +	.level_low_reset = true,
>   };
>   
>   static const struct meson_reset_param meson_a1_param = {
>   	.reg_count	= 3,
> +	.reset_offset	= 0x0,
>   	.level_offset	= 0x40,
> +	.level_low_reset = true,
>   };
>   
>   static const struct meson_reset_param meson_s4_param = {
>   	.reg_count	= 6,
> +	.reset_offset	= 0x0,
>   	.level_offset	= 0x40,
> +	.level_low_reset = true,
>   };
>   
>   static const struct meson_reset_param t7_param = {
>   	.reg_count      = 7,
> +	.reset_offset	= 0x0,
>   	.level_offset   = 0x40,
> +	.level_low_reset = true,
>   };
>   
>   static const struct of_device_id meson_reset_dt_ids[] = {
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>