[PATCH 7/7] arm64: dts: qcom: sda660-ifc6560: enable mDSP and WiFi devices

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Sat Sep 7 11:48:18 PDT 2024


Enable the onboard WiFi device present on the Inforce IFC6560 SBC.
Pretty much like MSM8998 this device also doesn't generate the
MSA_READY_IND indication.

For the reference:

ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40050000
ath10k_snoc 18800000.wifi: qmi fw_version 0x101d01da fw_build_timestamp 2018-07-26 21:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0.1.c2-00474-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: qmi not waiting for msa_ready indicator
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.54 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

---
Cc: ath11k at lists.infradead.org
Cc: Kalle Valo <kvalo at kernel.org>
---
 .../arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 09bc010ce56a..7948c8f6ab64 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -252,6 +252,11 @@ &qusb2phy1 {
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/sda660/mba.mbn", "qcom/sda660/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm660-regulators";
@@ -291,6 +296,11 @@ vreg_l1a_1p225: l1 {
 			regulator-allow-set-load;
 		};
 
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <848000>;
+		};
+
 		vreg_l6a_1p3: l6 {
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1368000>;
@@ -489,3 +499,15 @@ &usb3_qmpphy {
 	vdda-pll-supply = <&vreg_l10a_1p8>;
 	status = "okay";
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l9a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l6a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l19a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l8b_3p3>;
+
+	qcom,ath10k-calibration-variant = "Inforce_IFC6560";
+};

-- 
2.39.2




More information about the linux-arm-kernel mailing list