[PATCH 22/24] Input: sun4i-ps2 - use guard notation when acquiring spinlock

[Dmitry Torokhov]

Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
 drivers/input/serio/sun4i-ps2.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
index 95cd8aaee65d..267214ca9b51 100644
--- a/drivers/input/serio/sun4i-ps2.c
+++ b/drivers/input/serio/sun4i-ps2.c
@@ -101,7 +101,7 @@ static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
 	unsigned int rxflags = 0;
 	u32 rval;
 
-	spin_lock(&drvdata->lock);
+	guard(spinlock)(&drvdata->lock);
 
 	/* Get the PS/2 interrupts and clear them */
 	intr_status  = readl(drvdata->reg_base + PS2_REG_LSTS);
@@ -134,8 +134,6 @@ static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
 	writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
 	writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
 
-	spin_unlock(&drvdata->lock);
-
 	return IRQ_HANDLED;
 }
 
@@ -146,7 +144,6 @@ static int sun4i_ps2_open(struct serio *serio)
 	u32 clk_scdf;
 	u32 clk_pcdf;
 	u32 rval;
-	unsigned long flags;
 
 	/* Set line control and enable interrupt */
 	rval = PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
@@ -171,9 +168,8 @@ static int sun4i_ps2_open(struct serio *serio)
 	rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
 		| PS2_GCTL_BUSEN;
 
-	spin_lock_irqsave(&drvdata->lock, flags);
+	guard(spinlock_irqsave)(&drvdata->lock);
 	writel(rval, drvdata->reg_base + PS2_REG_GCTL);
-	spin_unlock_irqrestore(&drvdata->lock, flags);
 
 	return 0;
 }
-- 
2.46.0.469.g59c65b2a67-goog